Frigidaire FGID2474QF Use & Care Manual page 6

OPERATING INSTRUCTIONS
Sanitize Option
To sanitize your dishes and glassware, select
SANITIZE option, by pressing WASH TEMP pad.
When selected, the light will come on and remain
on until end of cycle. The water temperature in
the fi nal rinse will be raised to 155
will maintain that temperature for 9 minutes. This
option is available in Heavy and Normal Cycles.
Only these sanitization cycles have been designed
to meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached. Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
o o
at least 120 F (49 C).
The sanitize criteria may not be satisfi ed if there is
an interruption of the cycle, power failure or if the
incoming water temperature is below 120
To turn off the SANITIZE option, press the Wash
Temp pad. The SANITIZE light will turn off.
Heat Dry
The HEAT DRY option in combination with rinse
aid will enhance drying performance. HEAT DRY
option is available on all cycles.
Air Dry
The AIR DRY option will reduce temperature in the
hot rinse of the selected wash cycle. This option
will slightly decrease energy usage but will increase
the likelihood that dishware will not be dry.
My Favorite Cycle
The MY FAVORITE CYCLE option allows you to
program your preferred cycle and options into
one button. Once Programmed, simply press
the MY FAVORITE CYCLE button will select the
programmed cycle and options. Pressing the
START/CANCEL pad and close the dishwasher
door immediately will start the cycle.
To Program the MY FAVORITE CYCLE button:
1. Select your preferred cycle and options
2. Hold the MY FAVORITE CYCLE button for 3
seconds.
The LED over the MY FAVORITE pad turns on
indicating the MY FAVORITE CYCLE option has
been programmed. To change the MY FAVORITE
CYCLE option simply repeat steps one and two
above.
Child Lock Controls
To prevent children from accidentally changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing the DELAY
START pad until the status window displays "loc".
To unlock the controls, press the DELAY START
pad until "loc" is no longer displayed in the status
window.
6
Delay Start
The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
Select your desired cycle and options, then press
o o
F (68 C) and
the DELAY START pad until the desired delay
time displays in the status window. The LEDs of
selected cycle and options are illuminated. The
status window displays the delay time and then
displays 'Press Start'.
To start the delay countdown, press START/
CANCEL pad and close door immediately.
The status window displays 'Close door' after the
START/CANCEL pad is pressed.
A tone will sound indicating that the countdown
has started after the door is closed. The selected
cycle starts when the countdown is completed.
o o
F (49 C).
To Cancel a Cycle and Delay
Start
Both running cycle and delay countdown can be
cancelled at any time.
Open the dishwasher door and press the START/
CANCEL pad until you hear a tone. The running
cycle or delay countdown is cancelled.
If desired, a new cycle can now be selected, by
pressing START/CANCEL pad and closing the door
immediately, the new cycle will begin.
Opening the door during cycle
If you open the door while a cycle is running or
delay is counting down, the dishwasher will stop
running.
The LEDs of selected cycle and options are
illuminated, the status window displays the
remaining cycle time or delay time and displays
'Press Start'.
To resume, press START/CANCEL pad and close the
dishwasher door immediately.
The status window displays 'Close door' after the
START/CANCEL pad is pressed.
A tone will sound indicating that the dishwasher
will begin running from the point of interruption
after the door is closed.
If the dishwasher door is kept open for too long, or
the door is closed without pressing START/CANCEL
pad, the running cycle or delay countdown will be
cancelled.