Hints And Tips - AEG HKP95510XB User Manual

16 www.aeg.com
.
• Heat setting display for the left front
control bar shows the heat setting. To
change the heat setting use left
front control bar.
• When you activate the function for the
first time you will get heat setting
for the front position,
middle position and
position.

7. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, the bottom
made of multi-layer (with correct mark
from a manufacturer).
Activating the function
To activate the function place the
cookware in the correct position on the
cooking area. Touch
above the symbol comes on. If you do
not place the cookware on the cooking
area
the flexible induction cooking area is set
to
Deactivating the function
To deactivate the function touch
for the
set the heat setting to
for the rear
above the symbol
• not correct: aluminium, copper,
Cookware is correct for an induction
hob if:
• some water boils very quickly on a
• a magnet pulls on to the bottom of
You can change the heat settings for
each position separately. The hob will
remember your heat settings next
time you activate the function.
comes on and after 2 minutes
.
goes off.
brass, glass, ceramic, porcelain.
zone set to the highest heat setting.
the cookware.
The printing on the flexible
induction cooking area may
become dirty or change
colour from sliding the
cookware. You can clean the
area in a standard way.
The bottom of the cookware
must be as thick and flat as
possible.
. The indicator
or
. The indicator