To connect speakers to the main unit:
1
Insert the connector of the right speaker
wire to "R", and the connector of the left
speaker wire to "L".
2
Insert the connector of the subwoofer
wire to "SUB" socket.
Connect power
Caution
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage set on the voltage selector on the back
of the unit.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
EN
12
Note
•
The type plate is located on the back of the
main unit.
1
Connect the AC power cable to:
•
the main unit.
•
the wall socket.
Prepare the remote control
Note
•
Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert two AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
3
1
2
Note
•
If you are not going to use the remote control
for a long time, remove the batteries.
•
Do not use old and new or different types of
batteries in combination.
•
Batteries contain chemical substances, so they
should be disposed of properly.