Download Print this page

Table Of Contents; Important Safety Instructions - PRO Charging System Industrial Series Installation And Operating Instructions Manual

One/two/three 6 amp outputs

Advertisement

INSTALLATION AND OPERATING INSTRUCTIONS
FOR THE FOLLOWING BATTERY CHARGING SYSTEMS:
Model #
Recreation Series
IS1
IS2
IS3
IMPORTANT NOTICE
Please save and read all safety, operating and installation instructions before installing
or applying AC power to your PCS on-board battery charging system. Please contact
PCS with any product, installation, or service questions at technical support
(800.742.2740).
INTRODUCTION
Pro Charging Systems (PCS) has been manufacturing waterproof, on-board battery charging systems
since 1989. Our charging systems are designed and built tough to withstand intense vibration, extreme
temperature variations and submersion without damaging the unit. Our systems use temperature
compensation in order to fully charge a battery in hot or cold environments and are controlled by
microprocessors in order to assure precise control over each totally independent charging bank. All of
our chargers have true reverse polarity protection and incorporated a float maintenance mode upon
completion of each charge cycle.

TABLE OF CONTENTS

Important Safety Instructions.............................................................. Pages 2-3
Product Summary................................................................................Pages 4-5
Installation Instructions........................................................................Pages 5-6
Trouble Shooting.................................................................................Page 7
Warranty Information...........................................................................Page 8

IMPORTANT SAFETY INSTRUCTIONS

Use of attachments not recommended or sold by PCS may result in a risk of fire, electrical shock, or injury
to persons.
To reduce risk of damage to the electrical plug and power cord, always pull by the plug rather than by the
power cord when disconnecting charger.
Description
One 6 Amp Bank
Two 6 Amp Banks
Three 6 Amp Banks
Total
Independently charge 12V
Output
batteries in the following
systems:
6 Amps
12V
12 Amps
12V, 24V
18 Amps
12V, 24V or 36V
2

Advertisement

loading

This manual is also suitable for:

Is1Is2Is3