Aqua PRO APC3000 Operation Manual
  1. Manuals
  2. Brands
  3. Aqua PRO Manuals
  4. Swimming Pool Pump
  5. APC3000
  6. Operation manual

Aqua PRO APC3000 Operation Manual

Automatic pool cover pump
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
APC3000
AUTOMATIC POOL COVER PUMP
OPERATIONS MANUAL
WWW.ECOAQUAPRO.COM
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the APC3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aqua PRO APC3000

Summary of Contents for Aqua PRO APC3000

  • Page 1 APC3000 AUTOMATIC POOL COVER PUMP OPERATIONS MANUAL WWW.ECOAQUAPRO.COM...

  • Page 2: Safety Information

    MODEL Max. Lift 0 ft. 5 ft. 10 ft. 15 ft. 20 ft. APC3000 1800 1560 1320 21 ft. Safety Information DANGER: Do not pump flammable or e x plosive liquids suc h as W A RNING: Wear safety goggles at all times when working with...
  • Page 3 Safety Information (continued) CAUTION: Know the pump and its applications, limitations, IMPORTANT: Ensure the electrical power source is and potential hazards. adequate for the requirements of the pump. CAUTION: Secure the pump to a solid base. This will aid in IMPORTANT: Before using the pump, check the hose for keeping the pump in a vertical orientation.

  • Page 4: Pre-Installation

    Pre-Installation APPLICATION This automatic submersible utility pump is designed for water removal applications. Pump water only with this pump. It can automatically drain or remove water from the following: swimming pool covers, sinks, window wells, boats, low spot in yards, or other flooded areas.

  • Page 5: Package Contents

    Pre-Installation (continued) PACKAGE CONTENTS NOTE: The adaptor is not shown to scale. Part Description Pump 3/4 in. garden hose adaptor SPECIFICATIONS Power supply 115V, 60 HZ., 10 Amp Circuit Liquid Temp. Range 35°F to 77°F (1°-25°C) Discharge 1 in. Male NPT or 3/4 in. garden hose thread...

  • Page 6: Installation

    Installation Always use the handle to lift the pump. Never use the power cord to lift the pump. To avoid skin burns, unplug CAUTION: the pump and allow time for it to cool after periods of extended use. Connecting a 3/4 in. garden hose Connecting a 1-1/4 in.

  • Page 7: Care And Cleaning

    Airlock This pump is a centrifugal utility pump, designed to efficiently remove water. However, it cannot move air. If air is trapped inside the pump (a condition called “airlock”), the pump cannot pump water out even though the pump is completely submerged. This pump has an airlock hole.
  • Page 8 Care and Cleaning (continued) Deep clean the water sensors and impeller Pull the snap fittings on the pump housing and Pull the cap up along the pump housing remove the pump filter base. Clean the debris and contamination around the sensor probes.

  • Page 9: Troubleshooting

    Remove the screws (4) and take out the volute (3) from the pump and clean the debris on the impeller (1). Reassemble the volute (3), water sensor housing and sensor protection cap (6), pump base (5). Troubleshooting Problem Possible Cause Corrective Action The pump does not start.

  • Page 10: Warranty

    Warranty Limited Warranty For two (2) years from the date of purchase, AquaPro will repair or replace, at its option, for the original owner any parts of its filters (“Product”) which are found upon examination to be defective in materials or workmanship. This Limited Warranty covers parts only for a period of two (2) years.

Table of Contents