ASSEMBLY
ASSEMBLY
Shield Installation
Parts Required:
Cut-off knife on debris shield has sharp edges. Avoid contact
when installing or removing line head.
Wear Gloves or personal injury may result:
Cut-off knife is sharp.
◆
Gear case and surrounding area may be hot.
◆
1.
Remove wing nut (A), washer
(B), and bolt (C).
2.
Snap the shield over the
bearing housing.
3.
Install bolt (C), washer (B), and
wing nut (A).
18
Shield Assembly
B
A
© 04/21 ECHO Incorporated
GT-225
C
X7732273904