Parental Control Settings; Display Settings; Energy Saving Settings; Speaker Settings - Philips HTB5570D User Manual

[Night mode]: For quiet listening,
•
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
[HDMI Audio]: Set the HDMI audio
•
output from your TV, or disable HDMI
audio output from the TV.
[Speaker Setup]: Set up speakers for
•
best surround sound experience.
[Default sound settings]: Restore
•
the equalizer settings of all the sound
modes to the default values.

Parental control settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Change Password]: Set or change
•
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
[Parental control]: Restrict access
•
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].

Display settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Auto subtitle shift]: Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
EN
28
[Display panel]: Set the brightness of
•
the home theater front panel display.
• [VCD PBC]: Enable or disable the
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.

Energy saving settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Screen saver]: Switch the home
theater to screen saver mode after 10
minutes of inactivity.
[Auto standby]: Switch the home
•
theater to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
[Sleep timer]: Set the duration of the
•
sleep timer so that the home theater is
switched to standby after the specified
period.

Speaker settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Enhanced audio]: Select [On] to
•
enable audio post processing at the
speaker and enable karaoke settings
(if your product supports Karaoke).
To play the original audio of the disc,
select [Off].