HP S1932 User Manual page 16

Connecting Cables
Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable
Use a VGA video cable or a DVI-D (select models) cable to connect your monitor to your computer.
1. To connect the VGA cable (provided with select models)
Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA
video connector on the computer.
NOTE:
to connect your computer to the monitor. Connect the DVI-I to VGA adapter to the DVI connector
on the computer graphic card, and connect the VGA cable to the adapter and the monitor.
2. To connect the DVI-D cable (provided with select models)
Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI-
D video connector on the computer. You can use this cable only if your computer has a DVI
compliant graphics card installed. The monitor DVI-D connector and cable are included with select
models only.
Figure 3-6
10 Chapter 3 Setting Up the Monitor
If your computer has a DVI connector and no VGA connector, use a DVI-I to VGA adapter
Connecting the VGA or a DVI-D (select models) cable
ENWW