Warning Plates On The Turbocharger; Fig. 6: Warning Plate Locations - ABB HT610957 Operation Manual

Operation Manual / A150-M56/66/57/67 - A155-M..
2 Safety / 2.6 Warning plates on the turbocharger
State of the art
The turbocharger is designed and manufactured according to the state of the art and is safe
to operate.
Perfect condition
The turbocharger must only be used when it is in a technically flawless condition and oper-
ated in compliance with its intended use.
Turbo Systems excludes any liability for damage resulting from unauthorized modifications
to the turbocharger or improper operation.
2.6

Warning plates on the turbocharger

Warning plates are affixed at the following locations:
Fig. 6: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
Order new warning plates from Turbo Systems service stations.
u
Remove any warning plates that have become unreadable.
u
Clean and degrease the areas designated for the warning plates.
u
Fit new warning plates and remove protective sheets.
u
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
© Copyright 2022 ABB. All rights reserved. HZTL4032_EN Rev.S February 2022