Philips SDV1125T/67 Instructions

Instructions
For this antenna to work properly, you must access the menu on the television you
are connecting this antenna to (consult your television owner's manual) then set it
to receive the signal from an ANTENNA instead of CABLE or SATELLITE.
For TVs with 75 ohm connection
Attach cable from antenna directly to TV.
D Note
With screw connections a band separator (not included) is required to access UHF reception.
The product shall not be exposed to dripping or splashing and that no objects filled with
•
liquids, such as vases, shall be placed on the product.
To completely disconnect the power input, the mains plug of the product shall be discon-
•
nected from the mains.
Where the mains plug is used as the disconnect device, the disconnect device shall remain
•
readily operable.
No naked flame sources, such as lighted candles, should be placed on the product.
•
SDV1125T/67