LG FT025V2SS Owner's Manual page 30

global_main.book.book Page 29 Wednesday, October 14, 2020 1:58 PM
TurboWash
Adding this option reduces the programme time
but the similar washing results will be provided.
Crease Care
Adding this option reduces wrinkles by steaming
after spin.
Follow the next steps to use a special
option.
1
Press the Power button.
2
Select a washing programme.
3
Change the washing programme (Temp.,
Rinse or Spin) as necessary.
4
Press the Steam, TurboWash or Crease Care
button.
5
Press the Start/Pause button.
Saving and Recalling your Favourite
Programme
Use the Custom PGM and PGM Save functions to
save and recall your favourite washing
programmes.
You can customize washing programmes by
adjusting options, if needed.
NOTE
• Washing method, number of rinses, spin
intensity and water temperature etc. can be
saved in this customized function.
How to save your favourite programme
1
Press the Power button.
2
Select a washing programme and set your
preferred options as desired.
3
Press and hold the Custom PGM button for 3
seconds to save the favourite programme.
How to recall your favourite programme
Recall a customized washing programme that was
previously saved.
1
Press the Power button.
2
Load the clothes into the drum and add
detergents.
3
Press the Custom PGM button and press the
Start/Pause button.
Using Basic Options
You can customize the programmes by using the
following basic options:
Add Item
You can use this option in order to add or remove
clothes after the washing programme has started.
1
Press the Power button.
2
Select a washing programme.
3
Press the Start/Pause button.
4
Press the Add Item button as necessary.
5
Open the door after it unlocks itself and add or
remove necessary clothing items.
6
Close the door and press the Start/Pause
button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature inside of
the drum is high. It is not possible to add clothes
at this time.
Delay End
You can set this function so that the appliance
starts automatically and finishes after a specified
time interval.
OPERATION
29