Table of Contents
Advertisement
global_main.book.book Page 19 Wednesday, October 14, 2020 1:58 PM
Customizing Washing Programme Buttons
e
Use these buttons to adjust the water temperature, spin speed and soil level settings for the
selected programme.
• The current settings are shown in the display.
• Press the button for that option to select other settings.
Display
f
• The display shows the settings, estimated remaining time, options, and status messages.
When the appliance is turned on, the default settings in the display will illuminate.
• While the load weight is sensed automatically, the display on the control panel blinks.
Time and Status Display
Programme Status Indicators
a
• When a washing programme is running, LED for the active stage will blink, and the LEDs for
the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a
cycle is paused, the active stage LED will stop blinking.
Estimated Time Remaining
b
• When a washing programme is selected, the default time for that programme is displayed.
This time will change as options are selected.
• If the display shows
the load size. This is normal.
• The time shown is only an estimate. This time is based on normal operating conditions.
Several external factors (load weight, room temperature, incoming water temperature, etc.)
can affect the actual time.
AI DD
c
• AI DD
M
provides the appropriate drum rotation actions after load sensing is completed.
•
M
is activated when the Normal programmes are selected and operated.
H
lights up when the programme starts and the door is locked.
d
Description
Description
, then the time will be displayed after the load sensing has detected
---
OPERATION
19
Advertisement
Table of Contents
