Advertisement
Set the date and time
1
Press
.
2
Select [CLOCK & ALARM] > [SET
DATE/TIME], then press [OK] to
confirm.
3
Press the numeric buttons to enter the
date, then press [OK] to confirm.
»
On the handset, the time set menu is
displayed.
4
Press the numeric buttons to enter the
time.
•
If the time is in 12-hour format, press
/ to select [AM] or [PM].
5
Press [OK] to confirm.
Set the date and time format
1
Press
.
2
Select [CLOCK & ALARM] > [SET
FORMAT], then press [OK] to confirm.
3
Select [DATE FORMAT] or [TIME
FORMAT].
4
Select the setting. Select [DD/MM][MM/
DD] as the date display and [12 HOURS]
or [24 HOURS] as the time display. Then
press [OK] to confirm.
»
The setting is saved.
What is standby mode?
Your phone is in standby mode when it is idle.
The standby screen displays the handset name,
handset number, date and time, signal icon, and
battery icon.
Check the signal strength
•
The signal icon displays the link status
between the handset and base station. A
steady icon means your handset and the
base station are linked. A flashing icon
means your handset and the base station
are not linked.
•
Ensure the handset is linked to the base
station before you make or receive calls
and carry out the phone functions and
features.
•
If you hear warning tones, the handset is
almost out of battery or the handset is
out of range. Charge the battery or move
the handset nearer to the base station.
Switch your handset On/Off
•
Press and hold
handset. The handset's screen turns off.
Note
•
When the handset is switched off, no call can
be received.
•
Press
to switch on the handset. It takes
a few seconds for the handset to power
up.
to switch off the
EN
13
Advertisement
