Advertisement
2 Get started
Caution
•
Ensure you have read the safety instructions in
the "Important" section before you connect
and install your handset.
Connect the base station
Warning
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the phone.
•
Use only the supplied power socket to charge
the battery.
Note
•
The type plate is located on the bottom of the
base station.
1
Connect the output plug of the power
socket to the bottom of the base station.
2
Connect the power socket to a standard
wall outlet.
3
Connect the telephone line cord to the
phone socket at the bottom of the base
station and the wall phone socket.
EN
10
Connect the charger
Note
•
The instructions for charger connection below
is only available for multi-pack models.
1
Connect the output plug of the power
socket to the bottom of the charger.
2
Connect the power socket to a standard
wall outlet.
Advertisement
