Download Print this page

Bluetooth Connection; Troubleshooting - Philips SPM9800/10 User Manual

Wireless notebook mouse

Advertisement

Tip: 1. You can use 4-way scrolling on Windows
use the 4-way scrolling on Windows
scrolling driver from the Philips website: Log onto www.philips.com/
welcome and type the product number to search for the relevant driver.
4

Bluetooth connection

Note: Ensure that there is power in the battery.
Connect to PC:
1
Switch on the mouse (Fig. 2), and then press the
2
On the notebook, click
3
Add Bluetooth Device Wizard, choose My device is set up
Under
and ready to be found and then click Next.
4
Philips Bluetooth Mouse, and then click Next.
Select
5
Don't use a passkey, and then click Next > Finish.
Select
6
Bluetooth Devices, click OK.
Under
Your mouse is connected to you notebook and is ready to use (Fig. 3).
»
Connect to Mac:
1
Switch on the mouse (Fig. 2), and press the
2
On the notebook, click
3
Under Bluetooth Setup Assistant, click
4
Mouse, and then click Continue.
Select
5
When the device is found, click
Your mouse is connected to you notebook and is ready to use (Fig. 3).
»
5

Troubleshooting

If you use a
correctly. After successful installation of the Bluetooth dongle, follow
the above steps and re-pair the mouse again.
For recharge, ensure that the USB connector of your mouse is
properly plugged into a USB port on your notebook (Fig. 4).
Control Panel > Bluetooth Devices > Add... .
System Preferemces > Bluetooth > +.
Bluetooth dongle, ensure that the dongle ¡s installed
®
XP, please download the 4-way
®
CONNECT button.
Continue.
Continue > Quit.
XP or Vista. 2. To
CONNECT button.

Advertisement

loading

This manual is also suitable for:

Spm9800