Bluetooth Connection - Philips SPM6950/10 User Manual

Laser sensor
e
CONNECT : Connect Bluetooth
f
Battery compartment
g
Battery status
Power on
Connecting
Power low
4

Bluetooth connection

Note: Ensure that there is power in the battery.
Connect to Bluetooth PC:
1
Switch on the mouse (Fig. 2), and then press the CONNECT
button.
2
On the notebook, click Control Panel > Bluetooth Devices >
Add... .
3
Under Add Bluetooth Device Wizard , choose My device is set
up and ready to be found and then click Next .
4
Select Philips Bluetooth Mouse , and then click Next .
5
Select Don't use a passkey , and then click Next > Finish .
6
Under Bluetooth Devices , click OK .
Your mouse is connected to you notebook and is ready to use.
»
Connect to Bluetooth Mac:
1
Switch on the mouse (Fig. 2), and press the CONNECT button.
2
On the notebook, click System Preferemces > Bluetooth > + .
3
Under Bluetooth Setup Assistant , click Continue .
4
Select Mouse , and then click Continue .
5
When the device is found, click Continue > Quit .
Your mouse is connected to you notebook and is ready to use.
»
Indicator status
Flash once
Once every 2 seconds
Twice per second