Advertisement
Available languages
Available languages
■ Place attachment on the Vario filter
insert and turn clockwise until it clicks
into position.
■ Place the base unit on the attachment
and lock into position.
■ Insert the mains plug.
■ Hold the base unit and universal cutter
firmly and switch on the appliance (turbo
speed).
■ Release the On button after processing.
Note!
The universal cutter should be emptied
before the cut food reaches the lower edge
of the Vario holder.
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the attachment.
■ Turn attachment anti-clockwise and take
off the Vario filter insert.
■ Take hold of the blade by the plastic
handle and take out.
■ Remove Vario filter insert and Vario
holder.
■ Place the lid on the universal cutter to
keep in the processed ingredients.
Cleaning
Warning!
Never immerse the attachment of the
universal cutter in liquids and do not clean
under flowing water or in the dishwasher.
Wipe the attachment with a damp cloth only.
Note:
Universal cutter, blade, Vario holder, Vario
filter insert and lid are dishwashersafe.
Whisk
Please fold out the illustrated pages.
X Fig. A
11 Gear attachment for whisk
12 Whisk
A whisk can be ordered from customer
service (order no. 753124).
04_MSM881664_8001028707_Accessory.indb 9
Operation
The whisk is suitable for whipping cream,
beating egg whites and milk froth from hot
(max. 70 °C) and cold milk (max. 8 °C), as
well as for preparing sauces and desserts.
W Risk of scalding!
When processing hot milk, use a tall,
narrow receptacle for blending. Hot milk
may splash and scald you.
X Fig. F
■ Put ingredients into the blender jug.
■ Place the gear attachment on the base
unit and lock into position.
■ Insert the whisk into the gear attach-
ment and lock into position.
Warning!
Never insert the whisk into the base unit
without the gear attachment (Fig. F-3).
■ Insert the mains plug.
■ Set required speed using the speed
control (recommendation: high speed).
■ Grip base unit and blender jug and
press required On button.
■ Release the On button after processing.
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
the base unit from the gear attachment.
■ Remove the whisk from the gear
attachment.
Cleaning
Warning!
Never immerse the gear attachment in
liquids and do not clean under flowing water
or in the dishwasher. Wipe the gear attach-
ment with a damp cloth only.
Note:
The whisk can be cleaned in the
dishwasher.
Subject to change without notice.
English
en
9
03.12.2015 15:27:13
Advertisement
