Cutout Dimensions - U-Line U-BI98 User Manual & Service Manual

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE

Cutout Dimensions

PREPARE SITE
Your U-Line product has been designed for either free-
standing or built-in installation. When built-in, your unit
does not require additional air space for top, sides, or
rear. However, the front grille must NOT be obstructed,
and clearance is required for an electrical and water
connection in the rear.
!
CAUTION
Units can NOT be installed behind a closed
cabinet door.
CUTOUT DIMENSIONS
Filler Panel (Not Provided by U-Line) –
May Be Added Above or Below Unit
to Enclose for a Built-In Look
See Electrical
for Power Supply
Typical
Counter
Height
34-1/4"
(870 mm)
to
35-1/8"
(892 mm)
Cutout
Height
(178 mm)
27-3/8"
(695 mm)
(102 mm)
NOTICE
It is extremely important that this unit sits on a
level surface, as it does not have feet levelers. If
it is not level, the ice mold will not fill evenly.
Preferred location
21-1/2"
for water line and
(546 mm)
electrical outlet is
Minimum
in adjacent cabinet.
5/8"
7"
(16 mm)
4"
15-3/16"
(386 mm)
u-line.com
Cutout Dimensions 1