Disassembly Procedure - Panasonic DMC-FH5P Service Manual

8.3.

Disassembly Procedure

No. Item
1 Rear Case Unit
Front Case Unit
2 Sub Operation P.C.B.
3 LCD Unit
4 Top Case Unit
5 Lens Unit
6 Top P.C.B.
7 Main P.C.B.
8 Flash Unit
Speaker
9 Battery Case
10 Battery Door Unit
Fig Removal
(Fig. D1) Card
Battery
1 Screw (A)
4 Screws (B)
2 Screws (C)
(Fig. D2) Side Ornament R
1 Screw (D)
1 Locking tab
Rear Case Unit
2 Locking tabs
Front Case Unit
(Fig. D3) PP9501(Connector)
Sub Operation P.C.B.
(Fig. D4) 2 Locking tabs
PCB Spacer
1 Screw (E)
FP9003(Flex)
LCD Unit
(Fig. D5) 2 Screws (F)
Frame Plate A
2 Locking tabs
Power Knob
Top Case Unit
(Fig. D6) 1 Screw (G)
Front Ornament
FP9001(Flex)
FP9004(Flex)
FP9002(Flex)
Lens Unit
(Fig. D7) Solder (14 points)
1 Screw (H)
AF Panel Light
Top P.C.B.
(Fig. D8) 1 Screw (I)
1 Screw (J)
Main P.C.B.
(Fig. D9) 1 Screw (K)
(Fig. D10) Solder (5 points)
2 Locking tabs
SP sheet
Flash Unit
Speaker
(Fig. D11) 1 Locking tab
Battery Out Spring
Battery Case
(Fig. D12) Battery Door Shaft
Battery Door Spring
Jack Door
Battery Lock Knob
Battery Lock Spring
Battery Door Unit
8.3.1. Removal of the Rear Case Unit and
Front Case Unit
24
(Fig. D1)