SNOWJOE SUNJOE SPX3000-XT1-RM Operator's Manual
  1. Manuals
  2. Brands
  3. SNOWJOE Manuals
  4. Pressure Washer
  5. SUNJOE SPX3000-XT1-RM
  6. Operator's manual

SNOWJOE SUNJOE SPX3000-XT1-RM Operator's Manual

13a electric pressure washer. 2200 psi max pressure at initial discharge per csa internal pressure testing 1.65 gpm max flow with nozzle open at minimum pressure
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
A Division of Snow Joe
®
, LLC
© 2021 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
R
13A ELECTRIC PRESSURE WASHER
2200 PSI MAX PRESSURE
1.65 GPM MAX FLOW
Model SPX3000-XT1-RM
AT INITIAL DISCHARGE PER CSA INTERNAL PRESSURE TESTING
WITH NOZZLE OPEN AT MINIMUM PRESSURE
SAVE THESE INSTRUCTIONS
1
Form No. SJ-SPX3000-XT1-RM-880E-M-V1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SUNJOE SPX3000-XT1-RM and is the answer not in the manual?

Questions and answers

Related Manuals for SNOWJOE SUNJOE SPX3000-XT1-RM

Summary of Contents for SNOWJOE SUNJOE SPX3000-XT1-RM

  • Page 1 13A ELECTRIC PRESSURE WASHER 2200 PSI MAX PRESSURE AT INITIAL DISCHARGE PER CSA INTERNAL PRESSURE TESTING 1.65 GPM MAX FLOW WITH NOZZLE OPEN AT MINIMUM PRESSURE OPERATOR’S MANUAL Model SPX3000-XT1-RM A Division of Snow Joe ® , LLC Form No. SJ-SPX3000-XT1-RM-880E-M-V1 ©...

  • Page 2: General Safety

    ® ® dealer or call the Snow Joe + Sun Joe customer service ® ® center at 1-866-SNOWJOE (1-866-766-9563). call the Snow Joe + Sun Joe customer service center at 1-866-SNOWJOE (1-866-766-9563). WARNING! Do not use this appliance without reading...

  • Page 3: Electrical Safety

    Snow Joe ® + Sun Joe ® customer service center at should be performed only by qualified service personnel at 1-866-SNOWJOE (1-866-766-9563). an authorized Snow Joe ® + Sun Joe ® dealer. Replacement • Keep the machine on a stable, flat surface during operation, parts for a double-insulated appliance must be identical handling, transportation, and storage.

  • Page 4: Risk Of Electrocution

    4. It is not recommended to use an extension cord with 6. To prevent the appliance cord from disconnecting from the this pressure washer. The unit comes standard with a extension cord during operation, make a knot with the two 35 ft GFCI power cable.

  • Page 5: Product Description

    Product Description Purpose • This high-pressure electric power washer is intended for residential use to clean vehicles, machines, buildings, facades, etc. Areas of Application • Never use the machine in potentially explosive areas under any circumstances! • The operating temperature must be between 32ºF (0ºC) and 104ºF (40ºC). • The machine consists of an assembly with a pump, which is encased in a shock-absorbing housing. To provide the operator with an optimal working position, the machine is equipped with a stainless steel lance and a non-slip handle grip, whose shape and configuration comply with applicable regulations.

  • Page 6: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the WARNING! Electrical shock hazard.
  • Page 7 Know Your Electric Pressure Washer Read the owner’s manual and safety instructions carefully before operating the electric pressure washer. Compare the illustration below to the electric pressure washer in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.

  • Page 8: Technical Data

    4. Slide the transport handle into position and secure it with missing parts, DO NOT return the unit to the store. Please 4 large screws (Fig. 3). call the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOWJOE (1-866-766-9563).
  • Page 9 Fig. 6 Fig. 3 Transport handle Nozzle storage board Detergent bottle with foam cannon Fig. 7 5. To assemble the hose holder, slide the holder into position (Fig. 4) and secure it to the unit with one small screw Nozzle (Fig.
  • Page 10 8. Fit the stainless steel lance into the trigger gun and rotate WARNING! Keep hose away from sharp objects. the collar until the two parts are completely locked (Fig. 9). Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt to mend a damaged hose. Fig.

  • Page 11: Operation

    Fig. 16 Fig. 14 Safety lock Slot On/Off switch Trigger 14. Check that the electrical supply voltage and frequency (Volt/Hz) correspond to those specified on the pressure 3. Turn the switch to the ON (I) position to start the pressure washer rating plate. If the power supply is correct, you washer (Fig.

  • Page 12: Working With Detergents

    2. Engage the safety lock on the trigger handle by pushing Use only detergents specifically designed WARNING! up on the safety lock until it clicks into the slot (Fig. 18). for use with pressure washers, such as Sun Joe ® HOUSE + DECK WASH (SPX-HDC1G), Sun Joe ®...
  • Page 13 5. Select the right nozzle for the job (Fig. 23): Fig. 22 Fig. 23 Foam-volume adjustable knob 5. Apply detergent from the bottom to the top of the dry surface to be cleaned. Applying detergent in this manner i) The 0º intense-jet nozzle (red) is an extremely powerful will dissolve dirt most effectively.

  • Page 14: Shutting Down

    IMPORTANT! NEVER USE: Fig. 25 • Bleach, chlorine products, and other corrosive chemicals • Liquids containing solvents (e.g. paint thinners, gasoline, Trigger gun oils) • Tri-sodium phosphate products Rim + wheel brush Transfer adapter • Ammonia products • Acid-based products These chemicals will harm the unit and will damage the cleaning surface.

  • Page 15: Winterizing + Long-Term Storage

    CAUTION! The use of a pump protector is Fig. 27 recommended to prevent cold weather damage during storage over the winter months. Winterizing + Long-Term Storage Pre-filter If you must store your pressure washer in a location where the temperature falls below 32ºF (0ºC), you can minimize the chance of damage to your machine by utilizing the following procedure: • Disconnect all water connections.

  • Page 16: Recycling The Washer

    Snow Joe ® Sun Joe ® customer service center at 1-866-SNOWJOE (1-866- 766-9563). Model + Serial Numbers When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit.

  • Page 17: Troubleshooting

    • Clean or replace valves/seals. • Pump seals worn out. • Please call the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance. • Fuse has blown. • Replace fuse. Switch off other machines using Machine stops • Incorrect mains voltage. the same circuit. • Thermal sensor activated.

  • Page 18: Optional Accessories

    NOTE: Accessories are subject to change without any obligation on the part of Snow Joe ® + Sun Joe ® to provide notice of such changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe ® + Sun Joe ® customer service center at 1-866-SNOWJOE (1-866-766-9563).
  • Page 19 @snowjoe. • Wearing parts like belts, augers, chains and tines are not covered under this warranty. Wearing parts can be EXPORTS: purchased at snowjoe.com or by calling 1-866-SNOWJOE ® ® Customers who have purchased Snow Joe + Sun Joe (1-866-766-9563).
  • Page 20 sunjoe.com...

Table of Contents