Selecting Microwave Power & Cook Time; Quick Min Feature; Keep Warm Feature - Panasonic NN-SD763S Operating Instructions Manual

Microwave Power
& Cook Time
Example: To cook at P 6 (MEDIUM)
power for 1 minute 30 seconds
• Press Power Level
1.
until the desired power
level appears in the
display window.
Press 5 times
2. • Set Cooking Time
Time Dial
using Time Select Dial
to 1 minute and 30
seconds.
Rotate
3. • Press Start.
Cooking will start.
Press Power Level
once P10 (HIGH)
twice P9
3 times P8
4 times P7 (MEDIUM-HIGH)
5 times P6 (MEDIUM)
6 times P5
7 times P4
8 times P3 (MEDIUM-LOW)/DEFROST
9 times P2
10 times P1 (LOW)
NOTES:
1. For more than one stage cooking, repeat
steps 1 and 2 for each stage of cooking
before pressing Start Button. The maxi-
mum number of stages for cooking is
3.When operating, two beeps will sound
between each stage. Five beeps will
sound at the end of the entire sequence.
2. When selecting P10 (HIGH) power for the
fi rst stage, you may begin at step 2.
3. When selecting P10 (HIGH) power,
the maximum programmable time is
30 minutes. For other power levels, the
maximum time is 1 hour and 30 minutes.
4. For reheating, use P10 (HIGH) for liquids,
P7 (MEDIUM-HIGH) for most foods and
P6 (MEDIUM) for dense foods.
5. For defrosting, use P3 (MEDIUM-LOW).
DO NOT OVERCOOK. This oven requires
less time to cook than an older unit.
Overcooking will cause food to dry out
and may cause a fi re. A microwave oven's
cooking power tells you the amount of
microwave power available for cooking.
PA_F0003BK40CP_Eng_PP01_0306.indd 16 PA_F0003BK40CP_Eng_PP01_0306.indd 16
Selecting
The time in the
display window will
count down.

Quick Min Feature

This feature allows you to set or add
cooking time in 1 minute increments up to
10 minutes.
To Set Cooking Time:
1. • Press Quick Min until
3. • Press Start.
Cooking begins and the
time will count down. At
the end of cooking, 5
beeps sound.
NOTE:
1. If desired, you can use other power
levels. Select desired power level before
setting cooking time.
2. After setting the time by Quick Min
Button, you cannot use Time Dial.
3. Quick Min Button can be used to add
more time during manual cooking.

Keep Warm Feature

This feature will keep food warm for up to
30 minutes after cooking.
Example: To keep 2 cups of gravy warm
1. • Press Keep Warm.
2. • Set warming time, up to
Time Dial
Rotate
3. • Press Start.
NOTE:
Keep Warm can be programmed as the
fi nal stage after cook times have been
manually entered. It cannot be used in
combination with sensor or auto features.
16
the desired cooking
time (up to 10 minutes)
appears in the display
window. Power Level is
pre-set at P10.
30 minutes.
Keep Warm will
start. The time in the
display window will
count down.
2013-3-22 8:55:59 2013-3-22 8:55:59