Connections; Connecting To Wi-Fi; 3G Connectivity; A-Gps - Telefunken TF-MID1010G Instruction Manual

your calls diverted to and press Enable. New
settings will be transmitted to the network.
Now when you get an incoming call on the
second SIM-card while talking on the first one
the call will be forwarded to your first SIM so
you could choose to answer or ignore it.

Connections

Connecting to Wi-Fi

• Click the applications menu button in the
main screen, in the APPS tab select "Settings".
In the WIRELESS & NETWORKS section click
Wi-Fi to set it into the ON position.
• Connecting to the network: The system
automatically detects available Wi-Fi-networks
and displays their names; select a network you
want to connect to and, if necessary, enter the
password. When the connection is established,
the display shows the Wi-Fi icon (11) in the
notification area. The number of blue sectors in
the icon shows the strength of the Wi-Fi signal.
To add a Wi-Fi network to the list, click
"Add Network" in the top right corner, then use
the pop-up keypad to enter the network name
and click "Save".
After disabling Wi-Fi please switch the
3G module off and on again.

3G connectivity

Insert one or two 3G SIM-cards into
the appropriate slots on the unit. Click the
applications menu button, in the APPS tab
select "Settings". In WIRELESS & NETWORKS
select "More ..." Click on "Mobile networks",
put a tick next to «Modem power» and enter
the PIN-code. In the "Mobile network settings",
select "Access Point». Select your access
point from the list or adjust manually. When a
successful connection is performed,
appears in the system tray.
Once the SIM-card is inserted and
initialized, you must reboot the device to
ensure the correct network registration and
functionality.
• When using a device with 3G, while
out of network coverage, you must disable
the transmission of data in order to stop the
system from constantly trying to register in the
network. This is recommended to prevent poor
system performance and a shorter battery life.
• Impossibility of a 3G-connection can
be caused by a lack of 3G coverage in your
location, and in this case it is not a defect of
the device.

A-GPS

• The A-GPS function enables you to
determine the coordinates of the location of
mobile devices and display it on the map. The
positioning is performed via cellular connection
channel and/or Wi-Fi.
• Click the applications menu button, in
the APPS tab select "Settings". In "Location
services" put a tick next to the option "Google's
location service" and remove the tick for the
option "GPS satellites». Now when you start
working with map application (Google Maps),
after clicking on the
display the location of your device.
This unit is equipped with a GPS module
which allows to position your coordinates
without a Wi-Fi or cellular connection.

Connecting external USB-devices

• Connect an external USB-drive with a
microUSB cable to the microUSB or USB
(OTG-host) port of this unit. Run the "Explorer"
application and select "USB" to access the
contents of the connected drive.
• You can connect other peripheral USB-
devices (e.g. mouse, keyboard, external hard
drives). It's enough to connect the peripheral
device to the tablet; the device will be
recognized and connected automatically.
icon
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
Operation
icon the map will
9
9