Table of Contents
Advertisement
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Accessories (wall-hanging parts)
Spacer nut (2)
Preparation
Attach the spacer nut
When changing to installation with pedestal, remove the
spacer nut.
To remove the spacer nut, use a spanner or the like.
12
English
Holes for wall-hanging bracket installation
Rear of the TV
(View from the side)
A
Warning
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit's performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
a
b
Depth of screw
1: Upper side
1
minimum: 8 mm
maximum: 13 mm
2: Lower side
minimum: 11 mm
maximum: 39 mm
A
Diameter of screw
M6
2
Screw for fixing the TV onto the
wall-hanging bracket (not supplied
with the TV)
55-inch model
a: 400 mm
b: 300 mm
65-inch model
a: 400 mm
b: 400 mm
Advertisement
Table of Contents
