Table of Contents
Advertisement
Installing the monitor driver in Windows 8.1
To install the device driver in Microsoft® Windows 8.1, do the following:
Note: You must download the driver of your operation system from the Lenovo website
(www.lenovo.com/support/LI2215sD)
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot
into Windows 8.1 operating system.
4. On the Desktop, move mouse to low-right corner of screen, choose Setting, double click
Control Panel, and then double click the icon of Hardware and Sound, and then
clicking Display.
5. Click the Change the display settings tab.
6. Click the Advanced Settings icon.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Click Update Driver, then click Browse the computer to find the driver program.
11. Select Pick from the list of device driver program on the computer.
12. Click the Have Disk button. Click the Browse button and navigate to the directory that you
put your download drivers in.
13. Select the "LI2215sD.inf" file and click the Open button. Click the OK button.
14. Select LI2215sD and click Next. The files will be copied from the directory to your
hard disk drive.
15. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Colour Matching Profiles.
The system will automatically select the maximum refresh rate and corresponding color
matching profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at refresh
rate of 60 Hz.
Chapter 3. Reference Information 3-5
Advertisement
Table of Contents
