Philips ID9651B/51 User Manual page 39

Note
•
You have 2 chances to enter the correct PIN
code before your phone hangs up.
4
Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Note
•
When no message plays, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat current or play
previous message.
2 Play messages.
3 Skip to next message.
6 Delete current message.
7 Switch answering machine on
(not available during playback).
8 Stop message playback
9 Switch answering machine off
(not available during playback).
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering
machine.
1
Press menu.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [MSG QUALITY], then
press [SELECT] to confirm.
3
Select the new setting, then press
[SELECT] to confirm.
» The setting is saved.
Behavior of the light ring and LED
keys on the base station
The light ring is on when you approach the
base station, or when there is a new call or
new/unread message. The table below shows
you the current status with different light ring
flashing and LED keys behavior on the base
station.
Light ring on
the base
Incoming call Flashing
quickly
Recording Flashing
message from quickly
the missing call
During a call Off
New message Flashing
from the slowly
answering
machine
When you Fades in
approach the and stays
base station in on, then
standby mode fades out at
the end of
interaction
The on key
When you play
the message stays on until
from the base the message
station finishes
playing, then
stay on and
fades out
Keys activation Off
on the base
station.
LED keys on the
base
Off
Off
Off
Off
Fades in and
stays on, then
fades out at
the end of
interaction
The on key
stays on until
the message
finishes
playing, then
stay on and
fades out
Flashes twice
quickly and
emits a
confirmation
tone.
EN 39