Toro TITAN ZX6020 Operator's Manual page 34

Changing the Engine Oil
Service Interval: After the first 8 hours—Change the engine
oil.
Every 100 hours—Change the engine oil. (more often
in dusty, dirty conditions)
Note: Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil drains
completely.
2. Disengage the PTO, move the motion control levers to
the neutral locked position and set the parking brake.
3. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 38).
1
3
5
Figure 38
2
4
6
G0201 16
4. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the Full mark (Figure 39).
1
3
5
G0201 17
34
2
4
6
Figure 39