Samsung DV56H9100G Series User Manual page 25

rack Dry
Using the drying rack
1. The drying rack is installed in the drum at in default state.
2. When using this dryer for the first time, remove the drying rack from the drum. Pull upwards
vertically and take the drying rack out of the drum. Remove the package and keep it properly
stored.
3. When you need to use drying rack, refer to the following steps for installation.
Installing the drying rack
1. Open the dryer door.
2. Place the Drying Rack inside the product, and then align the holes of the filter handle of the
Drying Rack to the front projections.
3. Place the rear legs in the two recessed areas of the dryer's back wall, and then push down
the middle of the drying rack to fix it in place.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the dryer door.
6. Press the RACK DRY button in Time Dry cycle, and then select the time according to the
moisture and weight of item.
Place the Drying Rack inside the dryer, align the holes of the filter handle of the Drying
Rack with the front projections, and then secure the back of the Drying Rack.
SUGGESTED ITEMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Stuffed toys
(foam or rubber-filled)
Foam rubber pillows
Sneakers
Don't dry the drying rack together with the package when using the drying rack.
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items
WARNING
and create a fire hazard.
In case this model is not supplied with a Drying Rack, you can purchase it through a service
center.
DV9100HA DRY_DV56H_USER MANUAL_DC68-03170K-05_EN.indd 25
Drying Rack
English - 25
Door
SUGGESTED TEMP. SETTINGS
Extra Low (Time Dry cycle)
Extra Low (Time Dry cycle)
Air Fluff
Air Fluff
Air Fluff
2015/9/10 11:07:40