Remove The Speakers; Remove The Screws; Remove The Plasma Panel Sec- Tion From The Cabinet Assy (Glass) - Panasonic TH-42PY800H Service Manual

7.18. Remove the Speakers

1. Disconnect the relay connectors
2. Remove the screws (×4
Speaker (L, R).
7.19. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(×1 each).
2. Remove the cabinet assy and the plasma panel fastening
, ×6
screws (×4
each) and remove the
).
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (×6
Caution:
• Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel, and
install Spacer and Spacer Ring in an original installation
place after exchanging the Plasma Panel.
23
).