ActionTec ScreenBeam Pro User Manual page 62

2. Go to the Wireless Connection Property Settings section, and configure the
parameters according to specific requirements.
l
Network Name: The SSID of the wireless router (AP).
l
Security Type: Select a security type, the one you have selected on your wireless
router. Available security types are Open, Shared, WPA-PSK[TKIP], WPA2-PSK[AES],
WPA-PSK[TKIP]+WPA2-PSK[AES], PEAP/MSCHAPV2, and EAP-TLS.
l
Status: It displays the connection states.
When Shared, WPA-PSK[TKIP], WPA2-PSK[AES], or WPA-PSK[TKIP]+WPA2-PSK[AES]
is selected,
l
User Name: Not used.
l
Password: The pre-shared password for the wireless SSID.
When PEAP/MSCHAPV2 is selected,
l
User Name: This is for authentication through a RADIUS server. It is RADIUS account
User Name.
l
Password: It is RADIUS account password.
When EAP-TLS is selected, the following items are available:
l
User Name: It is the User Principal Name or RADIUS Identity (if necessary).
Note: The User Name supports these characters: a-z, A-Z, 0-9, @, ., and _.
l
Password: It is the password of the Private Key.
l
System Date & Time: It is used to set date and time for the receiver. You should set the
date and time according to the validity period of the certificates.
l
CA Certificate: It is the root certificate. Click the Browse button to browse and add the
certificate.
l
User Certificate: It is the user certificate. Click the Browse button to browse and add
the certificate.
l
Private Key: It is the user's private key. Click the Browse button to browse and add the
certificate.
l
Validity Period: It displays the effective period of the certificates.
58