Contents Before Use Tuner Precautions ..............4 Tuner Basic Operation ..........20 How to read this manual ......... 4 Memory Operation ..........21 Selecting Operation ..........21 Basic Operations Traffic Information ...........22 Tuner Setup ..............22 Functions of the Buttons on the Front Panel ... 5 Turning on the Unit ...........
Page 3
Setting Up Monitor Screen Setup ..........35 System Setup .............35 User Interface Setup ..........36 Special Setup .............36 Display Setup .............36 AV Setup ..............37 Controlling Audio Speaker/ X’over setup ..........38 Controlling General Audio ........39 Equalizer Control ............40 Volume Offset ............41 Sound Effect ...............41 Listening Position/ DTA ..........42 Remote control Functions of the Remote control Buttons ..43...
Before Use Before Use Ñ Precautions How To Reset Your Unit • If the unit or the connected unit fails to # WARNINGS operate properly, reset the unit.1 Press the <Reset> button.The unit returns to factory Ñ settings. To prevent injury or fire, take the following precautions: •...
Basic Operations Basic Operations Functions of the Buttons on Turning on the Unit the Front Panel The method of turning on is different depending on the model. Press the [ ] button. NOTE h The unit is turned on. • The panels shown in this guide are examples used to provide clear explanations of the ●...
Basic Operations Camera Initial Settings ■ Set the parameters for the camera. 1 Touch [Camera]. Initial setup 2 Set each item and touch [ For detailed operation, see Camera Setup Perform this setup when you use this unit first time. (P.33).
Basic Operations Calendar/clock settings Adjusting the volume To adjust the volume (0 to 40), Press the [FNC] button. Press [+] to increase, and press [−] to decrease. h Popup menu appears. Holding [+] increases the volume continuously to level 15. Touch [SETUP].
Basic Operations Gesture Touch Control: Display the HOME You can also control playback by moving your finger on the touch panel as follows (for some Press the ] button. sources, the gesture control is not available). • Sliding the finger towards up/down: Functions same as pressing (Media).
Page 9
Basic Operations Select the playback source To select the playback source on the HOME screen Touch [ ] on the HOME screen. From the screen, you can select the following sources and functions. • Switches to the Android Auto *¹/ Apple CarPlay *²/ Mirroring *³...
Basic Operations To turn off the AV source Source control screen descriptions Touch [ ] on the HOME screen. There are some functions which can be operated from most screens. Touch [AV Off]. Indicators Customize Short-cut buttons on HOME screen You can arrange the position of the source icons Short-cut buttons as you like.
Basic Operations Popup menu List screen There are some common function keys in the Press the [FNC] button. list screens of most sources. h Popup menu appears. Touch to display the popup menu. Displays list type selection window. Displays music/movie file list. The contents of the menu are as follows.
APPS-Android Auto™/ Apple CarPlay APPS-Android Auto™/ Apple CarPlay Apple CarPlay Operation CarPlay is a smarter, safer way to use your iPhone in the car. CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of the product. You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving.
APPS-Android Auto™/ Apple CarPlay To enter Android Auto mode, touch [Android Android Auto™ Operation Auto] icon in the source selection screen. (P.9) Android Auto enables you to use functions of your Android device convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient functions on the Android device while driving.
APPS-Android Auto™/ Apple CarPlay Ñ Mirroring Compatible Android smartphone You can display and control the App on the unit • Android version 7.0 or later while your smartphone is connected to the USB • Bluetooth support terminal. Ñ NOTE Preparation •...
iPod/iPhone Connect the iPod/iPhone using KS-U62. iPod/iPhone (P.48) Press the [ button. Preparation Touch [ Ñ Connectable iPod/iPhone Touch [iPod]. (P.9) The following models can be connected to this ● To disconnect the iPod/iPhone connected unit. with the cable: Made for Detach the iPod/iPhone.
iPod/iPhone Ñ Category search [Operation keys • 1] : Searches track/file. For details on search You can search a file by selecting category. operation, see Search Operation (P.16). Touch [Category List]. • E] [F] : Searches the previous/next track/ file. Touch and hold to fast forward or fast Touch the desired category.
Connecting a USB device USB Basic Operation Most functions can be controlled from the Connect the USB device with the USB source control screen and playback screen. cable. (P.47) Control screen Press the [ ] button. Touch Open the drawer Touch [USB].
Page 18
[Operation keys Key display area (Video file only) • 1] : Searches track/file. For details on search Touch to display the control screen. operation, see Search Operation (P.19). • E] [F] : Searches the previous/next track/ file. Touch and hold to fast forward or fast backward.
Ñ Search Operation Link search You can search a file of same artist/album/genre You can search music or video files by the as the current track. following operations. Touch [Link Search]. Touch [1]. Touch the desired tag type. You can select Touch [S].
Tuner Tuner Tuner Basic Operation Operation keys • [E] [F] : Tunes in a station. The method of Most functions can be controlled from the frequency switching can be changed (see 2 source control screen. in table). To enter Tuner source, touch [Tuner] icon in the •...
Tuner Memory Operation Selecting Operation Ñ Ñ Auto memory Preset select You can store stations with good reception in You can list and select memorized station. memory automatically. Touch [ ] on the right side of the screen. Touch desired band key. Select a station from the list.
Tuner Traffic Information (FM only) Tuner Setup You can listen and watch the traffic information You can set tuner related parameters. automatically when a traffic bulletin starts. Touch [ ] on the left side of the screen. However, this feature requires a Radio Broadcast Touch [SETUP].
Digital Radio Digital Radio Digital Radio Basic Operation Artwork area The picture data is displayed if available from Most functions can be controlled from the current content. source control screen. Touch to switch between the Control and To enter Digital Radio source, touch [Digital Information screen.
Digital Radio Ñ Storing Service in Preset Memory Service search You can select a service from a list of all services You can store the current receiving service in received. memory. Touch [1]. Select a service you wish to store in memory. Touch [ ] on the right side of the screen.
Digital Radio Traffic Information ■ [Priority] If the same service is provided by Radio Data System when reception of the service being You can listen and watch the traffic information provided by Digital Radio becomes poor, automatically when a traffic bulletin starts. automatically switches to Radio Data System.
Bluetooth Control Bluetooth Control Ñ About the cell-phone and Using the Bluetooth function, various functions Bluetooth audio player can be used: listening to the audio file, making/ receiving a call. This unit conforms to the following Bluetooth specifications: Information for using Bluetooth®...
Bluetooth device. Turn on the Bluetooth function on your smartphone/cell-phone. h Bluetooth SETUP screen appears. See the following section for each Search the unit (“KW-M745DBT”) from setting. your smartphone/cell-phone. • Connect the Bluetooth device (P.27) Operate your smartphone/cell-phone Ñ...
Bluetooth Control • [ ] : Randomly plays all tracks in current NOTE folder. Each time you touch the key, random • If the icon is lighted, it means that the unit will mode switches in the following sequence; use that device. All random ( ), Random off ( •...
Bluetooth Control Ñ Connect the Bluetooth audio Using Hands-Free Unit Selects the device to connect via Bluetooth You can use telephone function by connecting audio (A2DP) or APP (SPP). the Bluetooth telephone to this unit. Touch on the left side of the screen. NOTE Touch [BT DEVICE CHANGE].
Page 30
Bluetooth Control ● Bluetooth SETUP Call using the preset number 1) Touch [ Bluetooth SETUP screen appears. Touch [ NOTE Touch the Name or phone number. • The status icons such as battery and antenna displayed may differ from those displayed on the cell-phone.
Page 31
Bluetooth Control Ñ Ñ Voice Recognition Operations during a call You can access the voice recognition function of the cell-phone connected to this unit. You can search the cell-phone phonebook by voice. (The functionality depends on the cell-phone.) Press the [FNC] button for 1 second. ●...
Page 32
Bluetooth Control Ñ Ñ Phone number preset Phonebook transfer You can register frequently used phone You can transfer the phonebook in your numbers to this unit. Bluetooth smartphone via PBAP. Touch [ Touch [ Touch [Edit]. Touch [ h The phonebook data transmission starts. NOTE Select where to preset.
Other External Components Other External Components Ñ Camera Setup View Camera Press the [FNC] button. NOTE h Popup menu appears. • To connect a camera, see P.47. Touch [SETUP]. • To use a rear view camera, a REVERSE lead h SETUP Menu screen appears. connection is required.
Other External Components To adjust the parking guidelines External audio/video players— AV-IN NOTE • Install the rear view camera in the appropriate Connect an external component to the position according to the instructions supplied AV-IN input terminal. (P.47) with the rear view camera. •...
Setting Up Setting Up Monitor Screen Setup System Setup You can adjust image quality in video screen. NOTE Press the [FNC button. • Each operation in this section can be started h Popup menu appears. from the multi function menu. Touch [Screen Adjust.
Setting Up Initialize User Interface Setup ■ Touch [Initialize] and then touch [Yes] to set all the settings to the initial default settings. You can setup user interface parameters. Ñ Software Information Press the [FNC] button. h Popup menu appears. Check the software version of this unit.
Setting Up Ñ Change background image AV Setup Touch [Background] in the Display screen. You can set AV parameters. Select an image. Press the [FNC] button. h Popup menu appears. Touch [SETUP]. h SETUP screen appears. Touch [AV]. h AV screen appears. Select an original image in advance.
Controlling Audio Controlling Audio NOTICE Speaker/ X’over setup • Each operation in this section can be started from the multi function menu. Press the [ button. You can adjust the various settings such as Touch [ audio balance or subwoofer level. Touch [Audio].
Controlling Audio Location (Only for Front, Rear) TW (Tweeter) Gain * ■ ■ Select the speaker position you have fixed. Adjusts the tweeter level. (When front is selected on Speaker Select screen) Tweeter (Only for Front) ■ Phase Inversion* You can set the tweeter when you are ■...
Controlling Audio SW Level Equalizer Control ■ Adjusts the subwoofer volume. This setting is not available when subwoofer is set to You can adjust equalizer by selecting the “None”. See Speaker/ X’over setup (P.38). optimized setting for each category. Ñ Recall the EQ curve Press the [ button.
Controlling Audio Volume Offset Sound Effect Finely adjust the volume of the current source You can set sound effects. to minimize the difference in volume between Press the [ button. different sources. Touch [ Press the [ button. Touch [Audio]. Touch [ h Audio screen appears.
Controlling Audio Listening Position/ DTA Position DTA control You can fine-adjust your listening position. Adjust the sound delay time as nearer speakers Touch [Adjust]. to the selected seat have more delay time, so that the sound from each speaker arrive a Touch [Delay].
Remote control Remote control This unit can be operated using the remote Function control. Name For oceania sales area, the remote control is ASPECT Changes the aspect ratio. the optional accessory (RM-RK258). Numeric • Specifies the number to search in Keypad direct search.
Connection/Installation Connection/Installation Before Installation to a power source with a constant voltage supply, such as with battery wires, the battery may be drained. Before installation of this unit, please note the following precautions. • If the console has a lid, make sure to install the unit so that the front panel will not hit the lid # WARNINGS when closing and opening.
Connection/Installation Ñ Supplied accessories for Installing the unit installation 5 or 6 Car Bracket (3 m) (2 m) 5 or 6 Ñ Trim plate 1) Attach accessory 2 to the unit. (M5 × 6 mm) (M5 × 8 mm) Ñ Installation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤...
Page 46
Connection/Installation Ñ Ñ Microphone unit Removing the trim plate 1) Use the extraction key (accessory 4) to lever 1) Check the installation position of the out the four tabs (two on the left part, two on microphone (accessory 1). the right part). 2) Clean the installation surface.
Page 47
Connection/Installation Ñ Connecting wires to terminals Connect to vehicle’s steering remote Light Blue/Yellow (Steering remote control wire) harness. To steering remote Contact your JVC dealer for details. To use the steering wheel remote control STEERING feature, you need an exclusive remote adapter REMOTE INPUT (not supplied) matched to your car.
Page 48
Connection/Installation Ñ Ñ ISO Connector function guide Connecting an iPod/iPhone/ Android Android smartphone Micro USB to USB cable REAR OUT FRONT OUT AV IN 1 3 5 7 2 4 6 8 iPod/iPhone 1 3 5 7 2 4 6 8 Lightning connector CAM INVIDEO OUTVIDEO IN KS-U62 (0.8m)
Troubleshooting Troubleshooting Problems and Solutions Error Messages If any trouble occurs, first check the following When you fail to operate the unit correctly, the table for possible problems. cause of the failure appears as the message on the screen. NOTE No Device (USB device) •...
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. Ñ About files The following audio and video files are supported. ■ Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG2/4 AAC LC 8 –...
Appendix Specifications ■ Bluetooth section Technology ■ Monitor section : Bluetooth Ver.4.1 Picture Size Frequency : 6.75 inches (diagonal) wide : 2.402 – 2.480 GHz : 151.8 mm (W) × 79.7 mm (H) RF Output Power (E.I.R.P.) Display System : +4dBm (MAX), Power Class2 : TN LCD panel Maximum Communication range Drive System...
Page 52
Appendix ■ FM tuner section ■ Video section Frequency Range (step) Color System of External Video Input : 87.5 MHz – 108.0 MHz (50 kHz) : NTSC/PAL Usable Sensitivity (S/N : 30 dB) External Video Input Level (RCA jack) : 13.2 dBf (1.3 μV/75 Ω) : 1 Vp-p/ 75 Ω...
Appendix About this Unit MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO ■ Copyrights PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, • The Bluetooth® word mark and logos are registered LLC.
Page 54
Appendix – Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. – Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Need help?
Do you have a question about the KW-M745DBT and is the answer not in the manual?
Questions and answers