Operating The 2 / 3 Hour Start Up Timer Mode - Code Alarm PROFESSIONAL CA2LCD5 Owner's Manual

Operating the 2 / 3 Hour Start Up Timer Mode

The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour period.
This feature is especially useful in cold climates where the only means to keep the
engine and engine fluids warm is to periodically start the engine. The default setting
is 3 hour, Selection between 2 or 3 hour is made in option programming.
WARNING!
Be certain that the vehicle is outdoors before using this or any remote starting
device. A running engine produces dangerous carbon monoxide fumes which can be
harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is
garaged.
To begin the 2 / 3 hour start up timer mode:
1. Turn the vehicle's ignition ON then OFF.
2. Press and hold the valet button.
3. Press the
4. Release the valet button.
To exit the 2 / 3 hour start up timer mode:
1. Turn the vehicle's Ignition ON.
OR
2. Activate the remote vehicle start feature using the remote control.
2017 Voxx Electronics Corporation. All rights reserved.
button 4 times, the system will;
a. When set for 3 Hour (default) - chirp 2 times and flash the
parking lights 4 times.
b. When set for 2 Hour - chirp 1 time and flash the parking
lights 2 times.
11