Table of Contents
Advertisement
Maintenance and cleaning
• Before lifting or repositioning your monitor, it is best to unplug the
cables and power cord. Use a correct lifting method to place the
monitor. When lifting or carrying the monitor, grasp the edge of the
monitor. Do not lift the monitor through the base or cable.
• Cleaning. Turn off the power of the monitor and unplug the power
cable from it. Use a linen-free and non-abrasive cloth to clean the
monitor surface. Wet the cloth with neutral detergent and wipe stains
from the monitor.
• Do not use cleaning agents containing alcohol or acetone. Use a
special cleaner for LCDs. Do not spray the cleaning agent directly on
the screen, or the cleaning agent may get into the monitor and cause
an electric shock.
The following phenomena are normal for the monitor:
• Due to the characteristics of fluorescent lamps, the screen may flash
when used for the first time. Turn off the power switch, and then turn it
on again, confirming that such flashing has disappeared.
• You may find a slightly uneven brightness on the screen, which is
related to the desktop pattern you use.
• After the same image is displayed for a few hours, there may be a
previous screen image left displayed when switching images. The
screen will slowly restore, or you can turn off the power switch for
several hours.
• When the screen goes black or flashes, or is unable to continue
working, please contact your dealer or the Service Center for repair.
Do not repair the screen yourself!
The conventions used in this guide
Warning: This information is intended to prevent injury while you
are trying to complete a task.
Caution: This information is intended to prevent damage to the
components when you are trying to complete a task.
Important: This information must be followed when you are
completing a task.
Note: These tips and additional information are intended to help
you complete a task.
iv
Advertisement
Table of Contents
