Table of Contents
Advertisement
Quick Links
DOOR TYPE DISHWASHER
Purchase Date _______________
Serial No. ___________________
Ecomiser SR-02 / SR-03
Safety Instruction ------------ 3-4
Dishwasher Features -------- 5-6
Installation Instructions---- 7-12
Machine Operation -------- 13-18
Care & Cleaning --------------- 19
Common Dishwashing
Problems ------------------------ 20
Trouble Shooting -------------- 21
Customer Service ------------- 22
Wiring Diagram ------------- 23-24
Ecomiser SR-02 / SR-03 Manual 1/24 Page Rev.06
Advertisement
Table of Contents
Related Manuals for Ecomiser SR-02
Summary of Contents for Ecomiser SR-02
-
Page 1: Table Of Contents
Machine Operation -------- 13-18 Care & Cleaning --------------- 19 Common Dishwashing Problems ------------------------ 20 Trouble Shooting -------------- 21 Customer Service ------------- 22 Wiring Diagram ------------- 23-24 Purchase Date _______________ Serial No. ___________________ Ecomiser SR-02 / SR-03 Manual 1/24 Page Rev.06... - Page 2 Ecomiser SR-02 / SR-03 Manual 2/24 Page Rev.06...
-
Page 3: Safety Instruction
Dishwasher. - The dishwasher must be electrically grounded. Read the Installation Instructions for details. - The SR-02 dishwasher is designed to operate on 208-230V, 60 Hz 1 P and the SR-03 on 208-230V, 60 Hz 3 P. - Do not operate dishwasher, unless all enclosure panels are in their proper place. - Page 4 - Don’t close the door before confirming the safety of other people or objects. - Don’t open the door while the machine is operating, because it can cause serious scalds. - Don’t wash dishware or containers stained with industrial fluid. Ecomiser SR-02 / SR-03 Manual 4/24 Page Rev.06...
-
Page 5: Dishwasher Features
- 3 step screening system more effective to protect the washing pump - A low-noise and large output 1 Hp wash pump is installed for the Ecomiser models SR-02 / SR-03 for reliability and effective operation. - The door is guided with stainless steel bearings and has a S. S. spring counterbalanced handle. - Page 6 Weight Shipping(lbs) 225 (102Kg) 225 (102Kg) All specifications are subject to change without notice based on Ecomiser’s dedicated product improvement program. ACCESSORIES INCLUDED □ Combination rack (1 flat, 2 pin racks) □ 15A (1/2”) water inlet hose / 5feet (1.5 m) □...
-
Page 7: Installation Instructions
Connect supply cable with a UL-listed strain relief bushing (if nonmetallic cable is to be used). A 208- 230 volt, 60 Hz, 1 phase for SR-02 and 3 phase for SR-03 circuit is required for this machine. Despite the fact that the rating plate shows 220 volts, the unit is designed function properly on 208 volts to 230 volts. - Page 8 140℉/60℃. Adjust water supply time to 1 gal per cycle, using the water flow control valve inside the machine. Adjust so the fill indicating light stays on for 30 seconds. Figure 1-2 Fresh water connection Ecomiser SR-02 / SR-03 Manual 8/24 Page Rev.06...
- Page 9 3. DRAIN CONNECTIONS - The Ecomiser SR-02 / SR-03 models contain a 1 1/2” (38mm OD) drain hose for the end user’s convenience. - The Ecomiser SR-02 / SR-03 models are factory built with a drain pump. Recommended rough in height is maximum 18”...
- Page 10 4. DISPENSING SYSTEM CONNECTION The Ecomiser SR-02 / SR-03 models are designed for use with a liquid rinse aid and detergent. The Ecomiser SR-02 / SR-03 models equipped with liquid internal detergent and rinse aid pumps each have a tube exiting the machine at the lower rear. These tubes can simply be attached to detergent and rinse aid containers.
- Page 11 - After connecting the table to the machine, check that the door is moving up and down without any interference between machine and table. 6.2 The corner installation - For a corner installation only, move the rack guide rail from the front position to the side position. Ecomiser SR-02 / SR-03 Manual 11/24 Page Rev.06...
- Page 12 Another option is the table manufacture could weld a shaped bracket to mount the control on under the table. Display bracket should be located 10” (250mm) away from the machine. Ecomiser SR-02 / SR-03 Manual 12/24 Page Rev.06...
-
Page 13: Machine Operation
Some items may not be cleaned as effectively, resulting in the need for either a longer cycle or repeat washing. WASHING PROCESS DIAGRAM Washing Pump Detergent Supply Rinsing Pump Rinse Supply Start Washing Waiting Rinsing Ecomiser SR-02 / SR-03 Manual 13/24 Page Rev.06... - Page 14 * While door is closed, press START/STOP button to initiate the washing cycle. * While READY LED is turned off, machine will not operate. * After each cycle is completed, it will move in sequence. Ecomiser SR-02 / SR-03 Manual 14/24 Page Rev.06...
- Page 15 3) When the system is not set in MODE, UP/DOWN key will display time remaining of the cycle. 4) When the machine is not running, UP/DOWN button will configure washing time duration (65/90/120 seconds). 4-5 TEMPERATURE LOCK/UNLOCK Ecomiser SR-02 / SR-03 Manual 15/24 Page Rev.06...
- Page 16 2) Press START/STOP key during water drain stage to stop the cycle and the machine completely. 7. ERROR MESSAGE 1) Er1: Washing temperature sensor If OPEN or SHORT, temperature is above 110 ℃(230 ℉) Ecomiser SR-02 / SR-03 Manual 16/24 Page Rev.06...
- Page 17 1) When the machine is turned off, all pre-set data will be saved. 2) Pre-set data consists of washing time/detergent time/waiting time/rinsing time/rinse agent time, temperature setting, buzzer sound, temperature unit, and model number. Ecomiser SR-02 / SR-03 Manual 17/24 Page Rev.06...
- Page 18 It will increase the machine’s performance. When dishware is well organized, better performance in productivity can be achieved per rack. Ecomiser SR-02 / SR-03 Manual 18/24 Page Rev.06...
-
Page 19: Care & Cleaning
The interior of The Ecomiser SR-02 / SR-03 models are made of quality stainless steel that has been electro polished to make it the smoothest surface available. The smooth surface prohibits the accumulation of dirt and bacteria inside the unit. If the water in your area is especially hard, however, lime deposits could form inside the machine. - Page 20 - Check the amount of rinse aid is proper and it is fresh. WASHING ITEMS The Ecomiser SR-02 / SR-03 models have no control over what is put in dishwasher once installed in a user’s place. You are solely responsible for what you wash in your Ecomiser SR-02 / SR-03 models dishwasher.
-
Page 21: Problems
Even though the product is under warranty, if the problem is not caused by defective product workmanship or materials, you will be charged for a service call. If you’re still not sure, contact Ecomiser regional agent before you call a service technician. NORMAL PROBLEMS - Always, fresh detergent should be used. -
Page 22: Customer Service
Two-year parts, one-year labor from date of purchase. The Ecomiser SR-02 / SR-03 model replace parts for the stainless steel tank if it fails to hold water due to a manufacturing defect, such as rusting or cracking. The Ecomiser SR-02 / SR-03 model replacement parts and/or repair labor to correct defect in materials or workmanship. -
Page 23: Wiring Diagram
Annex 1: SR-02 Wiring Diagram Ecomiser SR-02 / SR-03 Manual 23/24 Page Rev.06... - Page 24 Annex 2: SR-03 Wiring Diagram Ecomiser SR-02 / SR-03 Manual 24/24 Page Rev.06...