Home Decorators Collection HB1078-313D Use And Care Manual page 3

Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or
removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing
the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
NOTE: Keep your receipt and these instructions
for Proof of Purchase.
TOOLS REQUIRED
Phillips
Screwdriver
1 Incandescent
60 W Bulb or
CFL or LED
Equivalent
HARDWARE REQUIRED
NOTE: Hardware not shown to actual size.
AA
Part Description
AA Base Screw
BB Wire Nut
CC Mounting Screw
EE Socket Ring
FF Mounting Bracket
Flathead
Screwdriver
Ladder
BB CC
Wire
Cutter
Electrical
Tape
EE
HOMEDEPOT.COM/HOMEDECORATORS
3
Please contact 1-800-986-3460 for further assistance.
Wire
Stripper
Safety
Goggles
FF
Quantity
2
3
2
1
1