amiad EBS-15000 On-Line Installation, Operation And Maintenance Instructions

Advertisement

Quick Links

AMIAD Water Systems
EBS-15,000 On-Line
16" - 20"
Serial number:
Order number:
Catalog number:
Filtration degree:
Tested by:
Installation, Operation and
Maintenance Instructions
Ref. 910101-000111/08.2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EBS-15000 On-Line and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for amiad EBS-15000 On-Line

  • Page 1 AMIAD Water Systems EBS-15,000 On-Line 16" - 20" Serial number: Order number: Catalog number: Filtration degree: Tested by: Installation, Operation and Maintenance Instructions Ref. 910101-000111/08.2019...
  • Page 2 Amiad assumes that all users understand risks involved within this file and/or its attached materials. This document is given in good faith and is not intended to impose any obligation to Amiad. While every effort has been made to ensure the information in this manual is accurate and complete, we would appreciate if you can bring any errors or omissions to the knowledge of Amiad or consult Amiad experts or its authorized representatives if you have any questions.
  • Page 3: Table Of Contents

    PARTS LIST – EBS-15000, ON-LINE ......................17 PARTS DRAWING #1 ..........................18 PARTS DRAWING #2 ..........................19 PARTS DRAWING #3 ..........................20 AMIAD LIMITED WARRANTY ........................21 With any inquiry please quote Filter Serial Number, located on the filter housing. EBS-15000-OL -910101-000111 910101-000111 / 08.2019...
  • Page 4: Specifications

    SPECIFICATIONS General Maximum flow rate 1800m /h; 7925USgpm Consult manufacturer for optimum flow depending on filtration degree & water quality. Min. working pressure 2bar; 29psi Or lower if pressure is increased for flushing Max. working pressure 10bar; 150psi 16bar (240psi) upon request Filter area 15,000cm ;...
  • Page 5: Safety Instructions

    ➢ Always observe standard safety instructions and good engineering practices whilst working in the filter’s vicinity. ➢ Use the filter only for its intended use as designed by Amiad, any misuse of the filter may lead to undesired damage and may affect your warranty coverage.
  • Page 6: Commissioning

    Operation procedures exactly as described in this manual. ➢ Commissioning the filter should be done by an authorized Amiad technician, do not attempt to commission the filter unaccompanied since this may lead to undesired damage and may affect your warranty coverage.
  • Page 7: Maintenance

    Maintenance Before any maintenance or non-regular operation please read the following: ➢ Servicing the filter should be done only by technicians authorized by Amiad. ➢ Disconnect the filter from the power supply and lock the Main Power Switch. ➢ Disconnect the compressed air supply, release the residual pressure and lock the Pneumatics Main Valve.
  • Page 8 DIMENSIONAL DRAWING & RECOMMENDED INSTALLATION This is a conceptual installation drawing. Note that piping is not included. EBS-15000-OL -910101-000111 910101-000111 / 08.2019 Page 8 of 22...
  • Page 9 DESCRIPTION OF FILTER OPERATION Filtering process: The EBS is a sophisticated yet easy-to-operate automatic filter, with a self-cleaning mechanism driven by an electric motor. The EBS is designed to work with various types of screens in filtration degrees from 500 to 10 micron, and is available in 8", 10", 12" and 14" inlet/outlet diameter.
  • Page 10 Connect the drive unit to the control panel by means of a 4 x 2.5 mm (12 or 14 AWG) wire in flex-conduct. Use a long enough cable to allow the drive unit to be removed and placed near the filter for maintenance, without having to disconnect it from the cable.
  • Page 11 All electrical works at the installation site must be done by a qualified and authorized electrician only. Make sure that this electrician is fully aware of all the relevant safety instructions. Install the control board in a dry and protected place (In out-door installation sites make sure to use a special control board for out-door installation).
  • Page 12 MAINTENANCE Before beginning any maintenance procedure, carefully read the safety instructions in chapter 2 of this document and make sure that all the workers at the filtration site are fully aware of and comply with, these and any other local safety instructions. General inspection of the filter operation This is the visual basic general inspection procedure of the filter for proper operation.
  • Page 13 Maintenance prior to long term cessation of filter operation The following must be done if the filter will not be operated for more than a month. Operate flushing cycle (If possible, with a closed downstream valve). Disconnect the control board from the power and lock the main switch before the limit switch disc reaches the switch. Release pressure from the filter.
  • Page 14: Dismantling & Assembling Of Filter Components

    DISMANTLING & ASSEMBLING OF FILTER COMPONENTS Opening the filter and disassembling its inner components is necessary for changing screens, periodic maintenance and repairs. Prior to opening the filter it is recommended to operate a flushing cycle by pressing the "TEST" push button. Dismantling Disconnect electrical power.
  • Page 15 Extracting the Screen The screen is heavy. To avoid personal injury use the Extractor and a lifting device to extract the screen. Clean and dry the rubber pads on the Extractor Fold the Extractor upwards (Figure 1). Figure 1 Insert the Extractor into the screen, about a quarter from top. Make sure that the extractor cushions do not touch the stitch found along the screen interior.
  • Page 16 Reassembling the "EBS" filter Before reassembling, visually check that all components are complete and in good mechanical condition. Install the seals (6.1/6.2) on the screen (6) and insert the screen into the filter housing (1). Position the scanner (7) in the filter housing. Make sure the lower shaft goes through the bearing (5). Locate the housing O-ring (2) properly in its groove.
  • Page 17: Parts List - Ebs-15000, On-Line

    PARTS LIST – EBS-15000, On-Line Description Cat. No. Description Cat. No. FILTER HOUSING 710105-xxxxxx 16.1 L-CONNECTOR 3/4" F/M GALVANIZED 780101-000789 O-RING SEAL P 2-392 NBR 770102-000165 3/4" BSPT AC BLACK SCREEN 200 M 010000-000042 SCREEN SUPPORT 710105-001763 17.1 O-RING SEAL P2-112 NBR "S" 770102-000082 O-RING SEAL (P2-237) NAT 770102-000126...
  • Page 18: Parts Drawing #1

    PARTS DRAWING #1 EBS-15000-OL -910101-000111 910101-000111 / 08.2019 Page 18 of 22...
  • Page 19: Parts Drawing #2

    PARTS DRAWING #2 EBS-15000-OL -910101-000111 910101-000111 / 08.2019 Page 19 of 22...
  • Page 20: Parts Drawing #3

    PARTS DRAWING #3 EBS-15000-OL -910101-000111 910101-000111 / 08.2019 Page 20 of 22...
  • Page 21: Amiad Limited Warranty

    Buyer Complaint Form, the submission of the complaint or any questions please contact your service representative. Upon written demand by Amiad the Buyer shall return the Defective Product - or a sample thereof - to Amiad, at Amiad's cost. If the Buyer ships any such Defective Product, Amiad suggests the Buyer package it securely and insure it for value, as Amiad assumes no liability for any loss or damage occurring during shipment.
  • Page 22 Amiad Water Systems Ltd. D.N. Galil Elyon 1, 1233500, Israel. Tel: +972 4690 9500 | Fax: +972 48141159 | Email: info@amiad.com Obelis s.a. Bd Général Wahis 53, 1030 Brussels, Belgium. Tel: +(32) 2732 5954 | Fax: +(32) 27326003 | Email: mail@obelis.net...

Table of Contents