Table of Contents
Advertisement
EN
Installing the AS3000 AS3X Flight Stabilization Module
Bind the PowerSafe Receiver
1. Bind the Forward Programming enabled PowerSafe Receiver to a Forward
Programming enabled transmitter. See the receiver manual for binding
instructions.
2. Fly and trim the aircraft before proceeding.
Installation
1. Solidly mount the AS3000 on a smooth fl at surface in the aircraft. The
module must be mounted fl at and in line with the nose/tail. There are
8 orientation options available.
2. Connect the cable from the Sensor port on the receiver to the port on the
rear of the AS3000.
IMPORTANT: Update your Spektrum transmitter with the latest Spektrum
™
AirWare
software to take advantage of Forward Programming.
See the transmitter manual for updating instructions.
1
5
4
2
3
6
7
4
8
IMPORTANT: Do not
mount the sensor
perpendicular to the
fl ight path.
Advertisement
Table of Contents
