Spektrum AS3000 Manual
Spektrum AS3000 Manual

Spektrum AS3000 Manual

As3x flight stabilization module

Advertisement

Quick Links

AS3000 AS3X Flight Stabilization Module
AS3000 AS3X Flugstabilisierungsmodul
Module de stabilisation de vol AS3000 AS3X
Modulo di stabilizzazione volo AS3000 AS3X

Advertisement

Table of Contents
loading

Summary of Contents for Spektrum AS3000

  • Page 1 AS3000 AS3X Flight Stabilization Module AS3000 AS3X Flugstabilisierungsmodul Module de stabilisation de vol AS3000 AS3X Modulo di stabilizzazione volo AS3000 AS3X...
  • Page 2 WARNING AGAINST COUNTERFEIT PRODUCTS: Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology.
  • Page 3 ® The Spektrum AS3000 AS3X Flight Stabilization Module is designed to provide the benefi ts of AS3X technology to Spektrum AR9140T, AR12310T and AR20310T PowerSafe™ telemetry receivers Features • Add AS3X technology to PowerSafe telemetry receivers. • Fully programmable with Forward Programming through Spektrum Transmitters* •...
  • Page 4: Installation

    2. Fly and trim the aircraft before proceeding. Installation 1. Solidly mount the AS3000 on a smooth fl at surface in the aircraft. The module must be mounted fl at and in line with the nose/tail. There are 8 orientation options available.
  • Page 5: First Time Setup

    1. Select Orientation, and press the roller to change if necessary. IMPORTANT: Eight orientation options are available. Select the orientation that correctly matches the orientation of the AS3000 in the model. 2. After the orientation is correct, roll to next and press to enter or roll to PREV...
  • Page 6 3. Roll to Frame Rate, and select the frame rate desired. The frame rate selected will adjust the frame rate of the response of the receiver and AS3000 to the servos. Frame rate is applied to all channels from 1 to 12 (13 to 20 are always 22ms), not just gyro assigned outputs.
  • Page 7: Gyro Settings

    Gyro Settings 1. Select Gyro Settings to reset the maximum gain values appropriate for the model type. 2. Manually adjusted Roll, Pitch, and Yaw maximum gains as desired. 3. Press next to adjust Stick Priority. Stick Priority Stick priority reduces the amount of gyro gain as you move the control stick away from center.
  • Page 8: System Setup

    Select BACK twice to exit out of Gyro Settings. System Setup Relearn Travel and Reverse Used to re-teach the receiver and AS3000 the travel limits and reversing after the fi rst time setup is already completed and changes are made to travel adjust, absolute travel, and servo reversing.
  • Page 9 Orientation 1. Select this menu to adjust orientation of the AS3000 if it was changed after First Time Setup. 2. The same 8 orientation options remain. Gain Channel Select 1. Change the Gain channel that was assigned in the First Time Setup.
  • Page 10 Nose-wheel 1. Select the Axis On or Off for the nose-wheel to activate or disable nose- wheel gain 2. Select the nose-wheel servo channel. 3. Select the retract channel used, when the gear is retracted the gain will be turned off. 4.
  • Page 11 4. Gain - The maximum gain for the nose-wheel is independent of the systems yaw gain. This gain is to set the gain for the nose-wheel only. 5. Learn Travel is used to teach the receiver and AS3000 the transmitters travel settings on the nose-wheel channel. Press apply after maximizing the...
  • Page 12: Receiver Settings

    Receiver Settings Telemetry 1. In the Receiver Settings menu, select Telemetry to activate or reset the mAh counter. 2. When the voltage meets this charged voltage, the mAh counter will be reset. Failsafe...
  • Page 13: Factory Reset

    This menu will capture the current transmitter positions for each output and set them to the Failsafe positions. Factory Reset Reset the receiver and AS3000 settings back to the default settings and clear all programming. NOTICE: Performing a factory reset will clear all settings from the model.
  • Page 14: As3X Control Direction Test

    AS3X Control Direction Test Power up the aircraft. Perform the AS3X Control Direction test by lifting or tipping the aircraft as shown. Ensure the AS3X technology moves the control surfaces in their proper direction. If the control surfaces do not respond as shown, go to the Setup Mode section on the previous pages for gain reversing instructions.
  • Page 15: Year Limited Warranty

    1-YEAR LIMITED WARRANTY What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the “Product”) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase.  What is Not Covered - This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or...
  • Page 16 https://horizonhobby.quickbase.com/db/bghj7ey8c?a=GenNewRecord, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or Services - If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number.
  • Page 17: Warranty And Service Contact Information

    Hobby GmbH FCC Information Supplier’s Declaration of Conformity AS3000 AS3X Flight Stabilization Module (SPMAS3000) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 18: Compliance Information For The European Union

    IC Information CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 19 © 2018 Horizon Hobby, LLC. DSM, DSM2, DSMX, SmartSafe, PowerSafe, AS3X, X-Plus, E-fl ite, Hangar 9 , Spektrum AirWare and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc.

This manual is also suitable for:

Spmas3000

Table of Contents