Table of Contents
Advertisement
Powering On the K2700
1. Power on the K2700 by pressing the POWER button on the right rear panel.
2. If you are using speakers, turn up the volume on your amplifier or mixer.
3. Slowly turn up the K2700 VOLUME Slider and play some notes to check the volume
level. (If you have a CC pedal plugged into the CC (VOLUME) jack, make sure it is set
to the maximum volume position.)
4. If you are using speakers and the K2700 is not loud enough, turn up the volume on your
amplifier or mixer.
5. If you are using a mixer and hear distortion, reduce the gain level on the mixer, or use
the mixer's Pad button if it has one (a button that typically decreases the audio input level
by 20 dB).
6. After using the K2700, if you are using speakers, turn the master volume all the way
down on your amplifier or mixer before powering off the K2700.
Auditioning K2700 Sounds
1. The K2700 starts up in Program Mode. Use the PREVIOUS and NEXT buttons, Alpha
Wheel, or CATEGORY buttons to select a different Program. See
page 15
for more details on selecting Programs or Multis.
1. To hear a Program Demo song for the current Program, press the 0/MISC and KEYPAD
buttons simultaneously.
2. To hear the capabilities of the K2700, you can play the multi-channel demo songs. Press
the USER and 0/MISC buttons simultaneously to listen to a multi-channel demo song.
3. To switch between auditioning Programs or Multis, press the PROGRAM or MULTI
Mode button under the MODE label to the right of the display.
Automatic Power Saving
The K2700 has an automatic power saving feature (Auto Power Off) that can automatically
power off the K2700 after a period of inactivity, in order to conserve electricity. The Auto
Power Off feature is enabled by default. The default Power Off Time is 8 hours, which will
cause the K2700 to power off after 8 hours of inactivity.
A count down timer warning will be shown in the display a few minutes before the K2700
is powered off. At any time, touching any K2700 control or playing a note will cause the
K2700 to remain powered on, until the K2700 has been inactive for the set Power Off Time.
Auto Power Off can be disabled in Global Mode. The Power Off Time can also be adjusted
in Global Mode.
Getting Started
Quick Start
K2700 Sounds on
5
Advertisement
Table of Contents
