Philips 221B3LPCB/00 Service Manual page 87

prevent monitors to talk to each other.
Power Sensor Functional Behavior
Time Period
Power Sensor
Power Saving
The following setup will be supported:
The monitors may influence each other. So Monitor 1 may produce unexpected brightness-switches in monitor
2 (and vice versa). Furthermore, user 1 could perhaps (via monitor 1) influence the power sensor readout on
monitor 2
Factory requirements
Factory requirements are taken into account.
It needs to do calibration to make sure the same detection distance.
Service requirements
Service requirements are taken into account.
In the factory mode, it needs to reserve the max. Distance adjustment value to adjust distance ranges.
60sec 60sec ~ 180sec
Lower down backlight
No ACTION
brightness
0 50%
Monitors standing back to back
Set up of multiple monitors under an angle
Meridian 3
180sec ~
Backlight & LCD panel
shutdown
80%
87