Operation; Turning On The Power And Selecting A Display Language; Setting The Clock; Using The Pause/Cancel Button - Samsung MW1255WA Owner's Manual

O
PERATION
Turning on the Power and Selecting
a Display Language
The first time you plug the power cord into an outlet,
or after there has been an interruption in power, the
display shows "SAMSUNG SO SIMPLE." At this
point, you can select a language and weight system
for the display. You can choose between English,
French Spanish and Portuguese and between
pounds (LBS) or kilograms (KG). To do so,
1
Press Start immediately after
plugging in your microwave. The display
shows "ENGLISH/LBS". If the display does
not show "ENGLISH/LBS", you will need to
unplug the microwave and then plug it in
again in order to change to the language.
2
Press Start repeatedly to select the lan-
guage and weight system you wish to
use:
• ENGLISH/LBS,
• ENGLISH/KG,
• FRENCH/KG,
• SPANISH/LBS,
• SPANISH/KG
• PORTUGUESE/KG
If you continue to press START, the set-
tings will cycle in the order shown here.
MICRO
When you have selected the language and weight sys-
tem you want to use, press the PAUSE/CANCEL button
to end this procedure, or press CLOCK to set the clock.
8 O
PERATION

Setting the Clock

1
Press the Clock button. The display will
show:
MICRO HELP
2
Use the number buttons to enter the cur-
rent time. You must press at least three
numbers to set the clock. If the current
time is 5:00 enter, 5,0,0.
HELP
3
Press Clock again. A colon will appear,
indicating that the time is set.
If there is a power interruption, you will need to
reset the clock.
You can check the current time while cooking is in
progress by pressing the Clock button.

Using the Pause/Cancel Button

The Pause/Cancel button allows you to clear
instructions you have entered. It also allows you to
pause the oven's cooking cycle, so that you can
check the food.
• Pause the oven during cooking: press
Pause/Cancel once. To restart, press Start.
• Stop cooking, erase instructions, and return the
oven display to the time of day: press
Pause/Cancel twice.
• Correct a mistake you have just entered: press
Pause/Cancel once, then re-enter the instructions.