Table of Contents
Advertisement
Building in
WARNING: Do not hold or carry the appliance by the door handle. The door handle cannot hold the weight of the
appliance and may break off.
Carefully push the oven into the unit, making sure that it is in the centre.
■
Open the door and fasten the oven with the screws that are supplied
■
Fully insert the appliance and centre it.
■
Do not kink the connecting cable.
■
Screw the appliance into place.
■
The gap between the worktop and the appliance must not be closed by
■
additional battens.
Important Information
The appliance is designed to be permanently installed with a three pin power cable and may only be connected
by a licensed expert in accordance with the connection diagram. Only a qualified electrician who takes the
relevant regulations in account may replace the power cord. Do not use multiple plugs, power strips or
extensions. Overloading causes a risk of fire. If the connection is no longer accessible following the installation,
an all-pin isolating switch with a contact gap of at least 3mm must be provided.
Ireland, UK & Australia
Do not connect the appliance using a 13 A plug or protect it with a 13 A fuse. This appliance must be protected
using a fuse that is rated 16 A or higher. The appliance must be disconnected from the power supply during all
installation work. When the appliance is installed, protection must be provided against accidental contact in
future.
8
<
10
6
Advertisement
Table of Contents
