Transportation And Changing Of Installation Position; Repositioning The Door - Electrolux LUT7ME28X2 User Manual

• Remove the vaporisation container from its position by removing the screws as indicated.
Clean it with soapy water at specific time intervals. This will prevent odours from forming.
Replacing LED Lighting
Depending on the model, one LED strip in the
freezer is used to illuminate the interior of your
appliance.
To replace any of the LEDs, please contact the
nearest Authorised Service Centre.
Some versions may not include freezer
illumination.
TRANSPORTATION AND CHANGING OF
PART - 5.
INSTALLATION POSITION
Transportation and Changing Positioning
• The original packaging and foam may be kept for re-transportation (optional).
• Fasten your appliance with thick packaging, bands or strong cords and follow the
instructions for transportation on the packaging.
• Remove all movable parts (drawers, Ice trays and so on) or
fix them into the appliance against shocks using bands when
re-positioning or transporting.
Always carry your appliance in the upright position.

Repositioning the Door

• It is not possible to change the opening direction of your appliance door if door handles
are installed on the front surface of the appliance door.
• It is possible to change the opening direction of the door on models without handles and
models with handles mounted on the sides.
• If the door-opening direction of your appliance can be changed, contact the nearest
Authorised Service Centre to change the opening direction.
EN - 21 -
LED strip