Table of Contents
Advertisement
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The guidelines use a unit of measurement known as Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is
1.6W/kg and the highest SAR value for this device when
tested at the head was 0.416 W/kg*, and when tested at the
body was 0.852W/kg* with10 mm distance.
As SAR is measured utilizing the device's highest transmitting
power, the actual SAR of this device while operating is
typically below that indicated above. This is due to automatic
changes to the power level of the device to ensure it only uses
the minimum power required to communicate with the
network.
* The tests are carried out in accordance with EN 50360, EN
50566, EN 62479, EN 62209-1 and EN 62209-2.
Specification
EUT
supports
radios
application
Maximum
RF output
power
GSM900/1800/1900
UMTS 900/2100
LTE 900/1800/2100/2500
802.11b/g/n
Bluetooth V4.1+EDR+LE
GPS
WCDMA Version Rel.8
LTE Version Rel.10
GSM900: 33 dBm
GSM1800/1900: 30 dBm
UMTS 900/2100: 24 dBm
LTE 900/1800/2100/2500: 23 dBm
Bluetooth: ＜ 20 dBm
802.11b/g/n:
2.4 GHz band ＜ 20 dBm
10
Advertisement
Table of Contents
