Advertisement
2.1 Multimedia Speaker System
5. CONNECTION
Connection MSS
M-410 speaker system can be connected to most of audio devices: DVD/CD players, PCs,
laptops, etc. (see connection diagram in Fig. 5).
• Before making any connections, make sure the MSS is off and unplugged. Then connect
satellites to the subwoofer AUDIO OUTPUT L/R m jacks using built-in audio cables. Connect the
right satellite to the subwoofer AUDIO OUTPUT R and the left satellite – to the AUDIO OUTPUT L
(see connection diagram in Fig. 5).
Phone
PC
DVD
CD player
TV
6. OPERATION MODES
Player Mode
• The system will enter the Player mode automatically when a carrier (USB flash or SD/MMC
card)* is connected to corresponding ports h or i; or press MODE button b on the front panel of
the subwoofer or SDl/USBm button on the remote control. The LED display will show selected
mode, total number of the tracks, exact track number on the play list and playback time. The
playback will start automatically.
• To select a track, you can directly enter its number on the remote control using the numeric pad
buttons a. The display will show the track number for a short time and then the playback time
elapsed.
* The operation may be incorrect if a SD card of 512 Mb capacity or lower is used. If a USB flash device of 8 Gb
capacity or more is used, command processing time may be extended.
2RCA to mini-jack
signal cable
(Cable included)
2RCA to 2RCA
signal cable
Right
satellite
Fig. 5. Connection diagram
Technical support: www.real-el.com
ENG
M-410
Left
satellite
5
Advertisement
