LG WTG1432VHF Owner's Manual page 40

Symptoms
40
Reason
Control error.
Water level is too high due to
a faulty water valve.
The water level sensor is not
working correctly.
A motor error has occurred.
Clutch error.
Tub Clean Alarm.
sensing malfunction.
Motor's revolution is too low.
CL is not an error. This
prevents children from
changing cycles or operating
the appliance.
Solution
• Unplug the washing machine and wait 60
seconds. Reconnect power and try again. If the
error code is not released, call for service.
• Close the water taps, unplug the washing
machine, and call for service.
• Close the water taps, unplug the washing
machine, and call for service.
• Allow the washing machine to stand for 30
minutes and then restart the cycle. If the error
code is not released, call for service.
• Unplug the washing machine and call for
service.
• Run the Tub Clean programme.
• Manually redistribute the load if articles have
become tangled.
• Unplug the washing machine and wait 60
seconds. Reconnect power and try again.
• Call for service.
• To deactivate, press and hold the Rinse button
for 3 seconds.
EN