Specifications - Sony VPL-VW870ES Operating Instructions Manual

Specifications

Item
Display System
Display device Size of effective
display area
Number of pixels
Projection lens
Light source
Projection image size
Accepted digital signals
Inputs/Outputs HDMI connectors
(HDCP 2.2)
TRIGGER
connectors
REMOTE connector
LAN connector
IR IN connectors
USB connector
Outside dimensions (w/h/d)
Mass
Power requirements
Power consumption
Standby mode power Standby
consumption
Networked Standby
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Supplied accessories
Optional accessories
Notes
• The values for mass and dimensions are approximate.
• Not all optional accessories are available in all countries and area. Please check with your local Sony Authorized Dealer.
• Information on optional accessories in this manual is current as of November 2017.
Design and specifications of this unit and its optional accessories are subject to change without notice.
Description
SXRD panel, projection system
0.74-inch (18.8 mm) SXRD
26,542,080 pixels (8,847,360 pixels × 3)
2.06 times zoom lens (motorized)
f = 21.7 mm to 44.7 mm
F3.0 to F4.0
Laser diode
60-inch to 300-inch (1,524 mm to 7,620 mm) (measured diagonally)
See "Preset Signals" (page 40).
× 2
× 2, mini jack, DC 12 V, Max. 100 mA
RS-232C: D-sub 9-pin (male)
RJ45, 10BASE-T/100BASE-TX
Minijack
Type A, DC 5 V, Max. 500 mA
560 mm × 223 mm × 496 mm (22
protrusions)
Approx. 20 kg (44 lb)
AC 100 V to 240 V, 4.3 A to 1.8 A, 50/60 Hz
430 W
0.4 W (when "Remote Start" is set to "Off")
1.0 W (LAN) (when "Remote Start" is set to "On")When a LAN terminal is not connected,
it becomes a low power consumption mode (0.5 W).
5°C to 35°C (41°F to 95°F)
20% to 80% (no condensation)
–10°C to +60°C (14°F to 140°F)
20% to 80% (no condensation)
See "Checking the Supplied Accessories" on the Quick Reference Manual.
Projector Suspension Support: PSS-H10
Active 3D Glasses: TDG-BT500A
39
1 25
/ inches × 8 / inches × 19
16 32
17
/ inches) (without
32