Motorola FOCUS88 User Manual page 12

• The following setup instructions will appear on the screen. (Picture A3)
• Plug in and switch on the camera, and wait for a couple of minutes for it to
warm up.
Continue
• Tap when the Camera LED starts to blink.
• The following setup instructions will appear on the screen. (Picture A4)
• Press and hold the
for 3 seconds. You will then hear a beep tone, followed by a voice prompt
indicating that the Camera is ready for pairing.
Continue
• Tap .
12
A3
A4
PAIR
button on the bottom left edge of the Camera Unit
Getting Started - Connecting Devices