Simer A5200 Owner's Manual page 13

LED Display
TABLE IV – Error Code Displays (LEDs Flashing)
TABLE V – Control Button Functions
Control Button: Result of Pushing Button:
System Test Pump starts and all LEDs light up.
Will reset the 'PUMP STATUS' LED.
When pushed with the 'SILENCE ALARM' button, the Charger/Controller microprocessor resets
and error code resets.
Silence Alarm Toggle; Prevents the audible alarm sounding. Press and release to reset.
Light Toggles the flood light on the Charger/Controller on and off.
System Reset Press and release 'SYSTEM TEST' and 'SILENCE ALARM' to reset system.
13