Page 1
Stereo Integrated Amplifier OWNER’S MANUEL MODE D’EMPLOI MANUEL DEL USUARIO BEDIENUNGSANLEITUNG BC ACOUSTIQUE BP 306 - 94709 Maisons-Alfort Cedex France...
Introduction Dear Customer, Thank you for choosing a BC Acoustique product. Its implementation has been our know-how, both in terms of design to the manufacturing. Electronic components and mechanical parts correspond to the selection criteria of very high quality. Operation and finish of each product have been checked before delivery. To obtain best results, please read the advice contained in this document.
BC Acoustique or not BC Acoustics dealer or technician approved, authorized to carry out maintenance and repair Turn off device if you do not intend to use this unit for a under warranty for BC Acoustique.
Warranty Connection to the amplifier - Some countries do not allow the exclusion or limitation of Be sure to turn off the power on your product before incidental or consequential damages or exclusions of making any connections. Similarly it is best to cut the power implied warranties.
Connections ④ LOUDSEPAKER TERMINALS ⑥ AC MAIN INPUT Connect the speaker to the terminals marked RIGHT "+ R" Once all connections to the amplifier, plug the power cable and "R -" ensuring that "R +" is connected to the "+" into an outlet and turn the unit on.
Page 6
Connections TONE CONTROL AND BALANCE ⑧ PHONE / HEADPHONES These functions on music signals output from the speakers Make sure the volume control is turned down before and the line output (RCA) outputs. They are not active on connecting or disconnecting headphones. Listening at high the REC output (for recording the original signals).
Remote control The amplifier EX-222 comes with an RC-EX1 remote control. It was designed to be both compatible with your amplifier but also the possible devices BC Acoustique (including CD players EX Series) range. ① POWER : This button allows you to pause or resume from standby different electronic devices BC Acoustique with this feature.
- Make sure the camera is turned on. - Check the fuse in the mains plug or adapter if necessary. BC ACOUSTIQUE There is no sound BP 306 - Make sure the unit is not in standby mode.
Need help?
Do you have a question about the X-222 and is the answer not in the manual?
Questions and answers