Acer Nitro XV272UP User Manual page 27

Audio
Mode - Stardard
Picture Volume
Color Mute
Audio
Gaming
OSD
System
Save Settings to...
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Volume: Adjust the volume
5. Mute:To choose mute on/off .
Gaming
Mode - User
Picture
Over Drive
Color FreeSync
Refresh Rate Num
Audio
VRB
Gaming
Ultra-Low Latency
OSD
Aim Point
System
Save Settings to...
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to control functions.
4. Over Drive: Select Off, Normal or Extreme.
5. FreeSync: To control support FreeSync or not, default is On.
---------------------------------------------------------------------------------------------------------
Note:
1. If FreeSync is "ON", then the Over Drive selection is set to "Normal"
automatically.
2. If FreeSync is "OFF", then the user can set Over Drive to either one of the
three settings including: (a) Extreme (b) Normal (c) Off.
6. Refresh rate num: Display the panel's current refresh rate on the screen.
70
Off
X
Normal
On
Off
Off
Off
X
Off